Topic: i need a few pointers :) (Read 3858 times)

minihero · « **Reply #15 on:** 23 September 2009, 21:15:31 »

wow yea ok i have now got myself a cam belt kit and tools and will be doing it over the next few days, i got a almost compleat service book, but no cambelt page has been stamped

so the car is now grounded

, better dafeish now than sorry, i have a video of my aircon light playing up i will post when i work out how to

.

minihero · « **Reply #16 on:** 23 September 2009, 22:30:58 »

Hello again ok managed to get them on youtube

here is the first http://www.youtube.com/watch?v=uofaUlIgJRw this showns the light the socond shows my rev needle http://www.youtube.com/watch?v=7oz4fvH9GHc and the last shows how bad my engine runs http://www.youtube.com/watch?v=yzqKeeJpTI4 and if anyone can answer the question on there too that will be a help

thanks for all your help so far

and as you will realise i am from bristol

.

minihero · « **Reply #17 on:** 25 September 2009, 22:50:53 »

ok done the cam belt

nice easy job really whoo, but after that she refused to start again after a few times round the block

, this is due to the idle control valve i think as when its unpluged i can keep it running and drive but gotta keep revs there

, the slapping/rattle niose is still present could this be due to a swirl baffle in the front exhaust loose? do omegas have these?

News:

Author Topic: i need a few pointers :) (Read 3858 times)

minihero

Re: i need a few pointers :)

minihero

Re: i need a few pointers :)

minihero

Re: i need a few pointers :)