Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mr ICE man]

my wishbone bushes are not good but the wishbones are and the ball joint is fine,the car has been sitting for ages,is it possible to just replace the bushes or do i need to replace the whole thing?both sides need doing.thsnks  all
!!

[Lazydocker]

It is possible to replace just the bushes but needs a press.

Replacing the whole wishbone is easier

[TheBoy]

Last time, I did just the bushes, using GM bushes. Cost around £50 for the 4 bushes IIRC, plus I owe Mr DTM a pint for the use of his (now broken) press....

[mr ICE man]

Is it possible to do it by using another means?such as a hefty vice etc?

[Boditza]

i did mine with lemforder ones.. you really need a good press, 24tons press. even with that it is possible not to work because they are solded if they haven't been changed for a long time. i had to burn them first because they wouldn't come off even after 28tons of force

[Lazydocker]

Is it possible to do it by using another means?such as a hefty vice etc?

Unlikely TBH... As stated, they can need a lot of persuading to get the old ones out. You're better off replacing the whole wishbone as if the bushes are gone there's a good chance the ball joints will fail in the near future too.

IMHO, new wishbones and a trip to WIM (or associated place) for full geometry setup is the best way to go

[Radar]

I remember reading you can fit polybushes which do not require a press but just push in. Worst ways you just need to hacksaw the old ones out. Maybe someone can confirm?

[Abiton]

Is it possible to do it by using another means?such as a hefty vice etc?

Yes:
http://www.omegaowners.com/forum/YaBB.pl?num=1271634445/3#3

[Lazydocker]

I remember reading you can fit polybushes which do not require a press but just push in. Worst ways you just need to hacksaw the old ones out. Maybe someone can confirm?

Yep... Can be done. But as I said above... The ball joints will need doing in the future too, and you can put money on it being soon after fitting poly bushes!