Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[scimmy_man]

yes, I just didn't remove it yet, do you think if this was removed the lights would go out..?

Ok. The gearbox ECU will be doing its' nut because it's not connected to a gearbox any more and it's asking the engine ECU to report a problem.

I think you will still get problems with the ECU removed. The other ECUs will expect it to be on the CAN bus and will raise a fault if they can't see it.

The proper solution is to reconfigure the engine and ABS/TC ECUs.

I believe non-DBW models used a more primitive form of signalling which probably doesn't detect the missing ECU.

Kevin

clear as mud