Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[affa1234]

hi,i have a v6 2.5 on a x plate and have just fitted a cruise control stalk and box and cable under the bonnet.does any 1 know how to activate it.or do i need other parts...regardes,

[RobG]

Did you check that your brake switch is a 4-pin one (and if manual will need clutch switch also)

[affa1234]

mine is auto,does the switch need to have 4 pins

[RobG]

mine is auto,does the switch need to have 4 pins

Look at the brakeswitch, it needs to look like this if it`s a 4-pin

[Andy B]

mine is auto,does the switch need to have 4 pins

yes.

[affa1234]

thanks will check 2moro..

[affa1234]

hi, checked the switch and it is 4 wire,anymore ideas as to what to do.

[TheBoy]

hi, checked the switch and it is 4 wire,anymore ideas as to what to do.

Was the switch itself 4 pin? You need to unplug it to check it.

[affa1234]

yes itis 4 pin,does iy need to be activated.

[TheBoy]

yes itis 4 pin,does iy need to be activated.

No.


How many wires did the stalk have on its fly-lead?

[affa1234]

not sure,will check it 2moro.thank.

[TheBoy]

not sure,will check it 2moro.thank.

*cough*
From Forum Rules:
Use English, no text speak which is notoriously difficult to read.
*cough*

(there are reasons)


Back on topic, ensure its the 4 wire stalk, and flying lead plugged in.

Also, check bowden cable is free to move, and properly attached to throttle

[affa1234]

got it working,thanks to all members for the info...ps,it was the brake light switch