Topic: breather bridge pipes (Read 822 times)

venom · « **on:** 28 March 2011, 17:43:17 »

I've changed the rockercover gaskets on my 2.5, I've cleaned out the breather system and the breather bridge but the two small pipes that sit in between the breather pipes on the back of the breather bridge one seems to have disappeared & I just can't locate it, so can anyone tell me where they start from so I can try to find the missing one

cheers

venom · « **Reply #1 on:** 28 March 2011, 20:51:33 »

Anyone please

YZ250 · « **Reply #2 on:** 28 March 2011, 21:00:32 »

One comes from the ventilator box ( breather box ). Second from left as you face the engine. Can't remember the other one at the moment. :-/

RobG · « **Reply #3 on:** 28 March 2011, 21:02:07 »

Driver`s side to post throttle breather, pass. side to purge valve (next to breather)

MutantCav · « **Reply #4 on:** 28 March 2011, 21:03:45 »

One from the breather box, just to the left of the plenum at the back of the box...think its also where the large pipe goes to...second goes to the carbon canister purge valve which is the little thing to the right of the breather box which is attached to it by a bracket

venom · « **Reply #5 on:** 28 March 2011, 23:10:36 »

Cheers lads

05omegav6 · « **Reply #6 on:** 28 March 2011, 23:24:42 »

Work down from the HBV and you'll find it.

venom · « **Reply #7 on:** 29 March 2011, 18:50:51 »

Well I found the pipe, when I was removing the rocker cover off I must have knocked the pipe off of the small male breather

News:

Author Topic: breather bridge pipes (Read 822 times)

venom

breather bridge pipes

venom

Re: breather bridge pipes

YZ250

Re: breather bridge pipes

RobG

Re: breather bridge pipes

MutantCav

Re: breather bridge pipes

venom

Re: breather bridge pipes

05omegav6

Re: breather bridge pipes

venom

Re: breather bridge pipes