Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tmx]

Does anybody know which color wires go to the display?

I have sussed the CD Changer & The BOSE Amp Wiring including the speakers

i just need to know which wires goto the display i have installed the CCRT display just need to know which wire / wires connect to the display

if i can find this out then in theory it should work! and i can produce my howto guide then!

[jules]

Best I can come up with is these four :



Red/gray
brown/white
green/brown/white
white/brown/white

cheers

[tmx]

Cheers thanks for the info ill have a look tonight as my work block photobucket! 4 wires and ill have to see what they tally upto on the ccr600 wiring!

[tmx]

i also need the CCR 600 display wires aswell!

[jules]

If the CCr600 has a triple info display then the wires are the same.

In the picture above, where I have scrawled GID, the four connectors with EMP to the right are for the GID, beneath that, the two connectors labelled CRP are for a TID. Same colour just less of them

[tmx]

no it had a MID

[jules]

MID uses same wiring as gid

[tmx]

cheers jules your a *

[Marks DTM Calib]

MID uses same wiring as gid

No it doesn't.....it ahs a CAn bus based link (a twisted pair basicly)

Here is the CCRT end of the install:



and here is the GID end (its the same pinout as the Nav Gid):

[TheBoy]

Its 2 wires.  As said in the other thread I will put up a guide ONCE I've fully figured out the CD Changer bit (also CAN) - I think I have it, just need to test, but I'm waiting for a bit to turn up.  Display is piss easy - had that working on dining room table weeks ago.  CD not quite so straightforward, as as well as having to run a new CAN pair down to it, looks as if some wires may need to be disconnected, as electrically incompatible.

Patience, my friend.

The CCRT700 is functionally identical to MID (with exception of phone/gps corner of display), and is still known as a MID in GM documentation, but electrically unique amongst all the displays fitted.

[tmx]

Done it last night

CCRT 700 working with telephone display and 6 Disc Changer

C1: Old Con P1 FSDA YELLOW CCRT

C2: FSCL P 2 BLUE CCRT

KW82 Pin 6 Brown White

Wiring the display like that got myn working also CCRT 700s arent coded to their displays as both my CCRTs work fine

CD Changer was easier than display!!!

They wire up totally the same except the wiring for audio channels is a different color!
my CCR 600 used CAN to speak to the CD Changer well there was a CAN pair in the loom anyway so i connected that and hey presto frigged the audio pairs up and now it works
Just need to wire BOSE Amp in on friday and ill produce my How To Guide

The disc changer is abit slower loading discs compared to the CCR 600!

The CCRT 700 display wires differently to the MID Pin 9 is redundant

[TheBoy]

Done it last night

CCRT 700 working with telephone display and 6 Disc Changer

C1: Old Con P1 FSDA YELLOW CCRT

C2: FSCL P 2 BLUE CCRT

KW82 Pin 6 Brown White

Wiring the display like that got myn working also CCRT 700s arent coded to their displays as both my CCRTs work fine

CD Changer was easier than display!!!

They wire up totally the same except the wiring for audio channels is a different color!
my CCR 600 used CAN to speak to the CD Changer well there was a CAN pair in the loom anyway so i connected that and hey presto frigged the audio pairs up and now it works
Just need to wire BOSE Amp in on friday and ill produce my How To Guide

The disc changer is abit slower loading discs compared to the CCR 600!

The CCRT 700 display wires differently to the MID Pin 9 is redundant

My changer - I'm missing the 2 wires from HU to drivers kick panel  :-/