Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Elite Pete]

Ive got a couple of new ones going spare

[VX1]

Hi all,

Regarding Saturday I can help with Pad and Disc change, oil filter change and anything else, BUT I don't know how to do the V6 cambelt change so can't do them. So if someone is willing to do my cambelt change then I can get on with someone else/ your car.

I will be bringing my,
Toll Box
Ramps
Axle stands x2 pairs
Jack
Breaker Bar
Impact wrench
Alloy Wheel Bolt Sockets
V6 locking tool kit (if its turned up by then)
Site Lights (240v)

Paul  

P.S I also have a 2.0ltr Cambelt kit as well so if someone needs there's doing but didn't get chance to get one I have one for sale. So if you want to do a swap with me for a V6 thermostat and associated parts then you could have it.

[TheBoy]

I may have to get someone to change my discs/pads on tractor, though its probably more involved than that

[Bo Bo]

Cheers guys  

[VX1]

I may have to get someone to change my discs/pads on tractor, though its probably more involved than that

In what way TB?
Should be just a case of removing the caliper and carrier then remove the disc, shouldn't take more than 20 mins each side start to finish.

Paul  

[TheBoy]

I may have to get someone to change my discs/pads on tractor, though its probably more involved than that

In what way TB?
Should be just a case of removing the caliper and carrier then remove the disc, shouldn't take more than 20 mins each side start to finish.

Paul  

As a minimum it'll need a fluid change, and possibly a caliper clean.

[Kate]

Hi. I can bring ramps and a trolley jack if that's any use?  I don't suppose anyone likes homemade wine?

[theolodian]

Hi. I can bring ramps and a trolley jack if that's any use?  I don't suppose anyone likes homemade wine?

Ramps could be useful, homemade wine could be nice.  

[Kate]

I'll bring both then!

[Albatross]

Where exactly is this going on?

I'm a bit miffed that I won't be picking my new car up until the 29th and it is overdue a belt change , but I'd like to drop in during the day (Please don't laugh at the 306 oil burner) and put some faces to names.

I can bring my boiler suit and a pair of willing hands.

[Andy B]

....
I can bring ......a pair of willing hands.

who are you taking?  

[TheBoy]

Where exactly is this going on?

I'm a bit miffed that I won't be picking my new car up until the 29th and it is overdue a belt change , but I'd like to drop in during the day (Please don't laugh at the 306 oil burner) and put some faces to names.

I can bring my boiler suit and a pair of willing hands.

All details in the thread in Meetings section

[VX1]

I may have to get someone to change my discs/pads on tractor, though its probably more involved than that

In what way TB?
Should be just a case of removing the caliper and carrier then remove the disc, shouldn't take more than 20 mins each side start to finish.

Paul  

As a minimum it'll need a fluid change, and possibly a caliper clean.

Having noticed that TB mine could do with a change and a caliper clean as well. My calipers seem to be in a disgusting state.

[TheBoy]

I pulled a muscle buggering about with the handbrake about a week and a half ago.  It still hurts.  I'm guessing it will be even worse by Sunday  after I've turned over a few engines a few times