News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

High Wycombe Date Confirmed

Started by Terbs, 02 April 2012, 16:33:18

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

the alarming man

ah that would make sense...did'nt want him driving up too wycombe on a sunday too find nothing happening.. :y
'the more people i meet...the more i like the dog'

The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser people so full of doubts.

Lazydocker

Quote from: Martian on 04 May 2012, 12:09:09
Quote from: Lazydocker on 03 May 2012, 19:36:45
The last 3 series rear springs I changed were a doddle... Drop the bottom shock mount and they will fall out without lowering the diff ;)
That's pretty much what the Youtube vids show, and the only possible problem I can foresee is if the bottom shock mount is secured by the "ba$tard" bolt. Official book time for both sides is 0.95, which would also indicate it is a pretty simple job (famous last words  ;D )

As long as chris has his impact gun you should be fine ;) ;) IIRC the last set I changed (admittedly on a 2 post lift) took me under 30 mins for the pair ;) :y
Whatever it is... I didn't do it

feeutfo

Need to check my spring compressors will work/fit before we start the front. But doesn't "look" to bad.

05omegav6

Quote from: chrisgixer on 05 May 2012, 00:04:01
Need to check my spring compressors will work/fit before we start the front. But doesn't "look" to bad.

Will pop mine in the car just in case  along with LDs carpet :y

TheBoy

Quote from: Lazydocker on 04 May 2012, 23:28:37
Quote from: Martian on 04 May 2012, 12:09:09
Quote from: Lazydocker on 03 May 2012, 19:36:45
The last 3 series rear springs I changed were a doddle... Drop the bottom shock mount and they will fall out without lowering the diff ;)
That's pretty much what the Youtube vids show, and the only possible problem I can foresee is if the bottom shock mount is secured by the "ba$tard" bolt. Official book time for both sides is 0.95, which would also indicate it is a pretty simple job (famous last words  ;D )

As long as chris has his impact gun you should be fine ;) ;) IIRC the last set I changed (admittedly on a 2 post lift) took me under 30 mins for the pair ;) :y
Ah, yes, must remember to charge mine
Grumpy old man

ted_one

I do'nt usually come to the meets to get help with a problem,but this time I really could do with a  bit of practical help in regards to the two glove compartment covers and the fuse box cover as I've got this far with an interior change and I really cannot grasp how to do them.Durr  ::)If I bring them along is there some one who would be willing to have a crack at doing them with me as the gopher or is this a bit to much of a job to be doing at a meet?
:-[

Delroy47

Hi all never been to a meet and I am actually free on monday so will be attending as its an easy journey from the other half's. I have some EML issues that have baffled me and could do with some help. I look forward to meeting up with you all

ted_one

Just to clear up a point on my last post,It'll be myself who will be assuming the role of the Gopher as I understand clearly that I possess the skill levels required to do the job of Gopher/Dogsbody, as it's just been pointed out to me by SWMBO.. ::)

Terbs

#83
Ken...don't know about the too big bit...I seem to remember Radar's engine spread over the car park last time ;D ;D ;D ;D

And don't forget Taxi-Al wegded under my wings ;D ;D ;D

It seems there is going to be  a spring change going on too...plus hopefully my CL and sterio problems......
We want a bit of decent weather or a few gazeebo's.

And.....Delroy47....more than welcome :y

This looks like being a bumper meet....scuz the pun ;D  Just sent swmbo off out for supplies :y Bacon may be off tho...she turned her nose up when I said :(
Wrong Switch Tony......flicking the wrong bit for 50 years

Terbs

Hmmmmmmmm....no bacon

But she has turned up with 48 Chicken Drumsticks ;D ;D ;D ;D ;D :y
Wrong Switch Tony......flicking the wrong bit for 50 years

Martian

Quote from: terbert on 05 May 2012, 15:05:21
Ken...don't know about the too big bit...I seem to remember Radar's engine spread over the car park last time ;D ;D ;D ;D

And don't forget Taxi-Al wegded under my wings ;D ;D ;D

It seems there is going to be  a spring change going on too...plus hopefully my CL and sterio problems......
We want a bit of decent weather or a few gazeebo's.
I'll remove the Smokie cassette with my eyes closed, but that doesn't mean you'll hear the end of it  ;) ;)

Grrrrrr

I'm cleared to attend so will head over for lunch. You'll hear me coming as the exhaust is starting to blow a little!
Work is the curse of the drinking classes (Oscar Wilde)

the alarming man

Quote from: nitro on 05 May 2012, 13:48:57
I do'nt usually come to the meets to get help with a problem,but this time I really could do with a  bit of practical help in regards to the two glove compartment covers and the fuse box cover as I've got this far with an interior change and I really cannot grasp how to do them.Durr  ::)If I bring them along is there some one who would be willing to have a crack at doing them with me as the gopher or is this a bit to much of a job to be doing at a meet?
:-[


don't worry i will get your glove box out....tie it too the back of my car and terberts carpark is big for me too get a bit of speed up....mind you not sure what else will be removed???... :y
'the more people i meet...the more i like the dog'

The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser people so full of doubts.

Radar

Quote from: nitro on 05 May 2012, 13:48:57
I do'nt usually come to the meets to get help with a problem,but this time I really could do with a  bit of practical help in regards to the two glove compartment covers and the fuse box cover as I've got this far with an interior change and I really cannot grasp how to do them.Durr  ::)If I bring them along is there some one who would be willing to have a crack at doing them with me as the gopher or is this a bit to much of a job to be doing at a meet?
:-[

I'm sure you will know much more than me Ken on how to do this but i've got an old haynes manual somewhere i could bring - might give some pointers even if it doesn't cover facelifts?

ted_one

That's very kind and thoughtfull of you Mark BUT I cant find that procedure in the Haynes manual,SO I'm gonna pass on that offer, unique  and inovatative as it may be!! :o ::)