News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

Next Hampshire meet?

Started by Gaffers, 10 October 2012, 11:19:17

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Radar

Sounds good - could be up fro something feb. time. :y

Marie

sounds like a cracking idea. I Am game tooding on work shifts and if i am in germany or not.

My half an engine ;D is due a cambelt change early 2013 :)

i dont mind helping with the ATF changes ether as long as it dont get in my hair  ;D ;D ;D ;D
Now has two miggs in our house hold. Both 2.0ltr 16v lpg'd. a MFL and a FL.

Martian

Quote from: Guffer on 10 October 2012, 11:19:17
As already stated on another thread I am back next week after 6.5 months away.  It also looks like that next summer I will lose access to the workshop facilities I enjoy on a regular basis.

When are people up for the (possibly) final Hampshire cambelt meet?  November is completely out of the frame and December is party season.  What does everyone think of Jan/feb?
Works for me  :y

Entwood

#18
Quote from: Guffer on 10 October 2012, 11:19:17
As already stated on another thread I am back next week after 6.5 months away.  It also looks like that next summer I will lose access to the workshop facilities I enjoy on a regular basis.

When are people up for the (possibly) final Hampshire cambelt meet?  November is completely out of the frame and December is party season.  What does everyone think of Jan/feb?

Count me in .. even if nowt needs doing i'll come along to help/drink beer/eat curry/talk crap ....   :) (and if you need the small BBQ again....  :) )

There are some dates in Jan/Feb that might not work .. but we'll have to see what you decide .. :)

Seth

Stick me down too General ..... Jan/Feb 2013 sounds good to me! :y

Might be an opportunity to fit the Powerflex A/R bar bushes that've been sat on my workshop bench for ..... er ..... quite a while now! :-[
I'm sure that Shackeng'll be quite interested in watching the proceedings too! ;)
Gettin' seriously hacked-off by those who ignore the wisdom of proven experience ... and Forum guidelines.

Shackeng

Quote from: Seth on 21 October 2012, 13:37:16
Stick me down too General ..... Jan/Feb 2013 sounds good to me! :y

Might be an opportunity to fit the Powerflex A/R bar bushes that've been sat on my workshop bench for ..... er ..... quite a while now! :-[
I'm sure that Shackeng'll be quite interested in watching the proceedings too! ;)

I certainly will Seth, thanks for pointing me this way. Only trouble is, which one do I bring? the 3.2 for an ATF change, or the TD for a gearbox swap? Are there likely to be enough suckers strong helpers to assist in swapping my AR25 for an AR35? (Which sits in the corner of my garage and looks at me accusingly every time I pass it!) If so count me in. :y

Gaffers

Quote from: Shackeng on 21 October 2012, 14:19:50
Quote from: Seth on 21 October 2012, 13:37:16
Stick me down too General ..... Jan/Feb 2013 sounds good to me! :y

Might be an opportunity to fit the Powerflex A/R bar bushes that've been sat on my workshop bench for ..... er ..... quite a while now! :-[
I'm sure that Shackeng'll be quite interested in watching the proceedings too! ;)

I certainly will Seth, thanks for pointing me this way. Only trouble is, which one do I bring? the 3.2 for an ATF change, or the TD for a gearbox swap? Are there likely to be enough suckers strong helpers to assist in swapping my AR25 for an AR35? (Which sits in the corner of my garage and looks at me accusingly every time I pass it!) If so count me in. :y

Absolutely, the ramp in the new place is perfect for gearbox changes.  Lots of space underneath even when fully down and lots of room on top to move the car fwd and back :y

Seth

Well get a date sorted 'en, dear boy! ;D
Gettin' seriously hacked-off by those who ignore the wisdom of proven experience ... and Forum guidelines.

Marie

I am up for doing a gearbox change. dont take long me and kevin had one out and in with in 4 hours  :)

Now has two miggs in our house hold. Both 2.0ltr 16v lpg'd. a MFL and a FL.

TheBoy

Quote from: Marie on 21 October 2012, 20:15:14
I am up for doing a gearbox change. dont take long me and kevin had one out and in with in 4 hours  :)
What were you playing at?

Sassanach and I had one out, dismantled, investigated, and a replacement put in in 2 hours ;D

But, then, I think he's done it before. Several times ;D

And more recently, Sassanach and I had one out, new thrust washer fitted, and popped back in in about 90 mins.

The guy is a monster with these autoboxes :y
Grumpy old man

Shackeng

Sounds as though enough willing helpers will be there, should I get a new thrust washer as a precaution? The box to go in has done about 11k since overhaul. :-\

Gaffers

I have a spare thrust washer kit here you can have, also if you want to bring the other miggy down for a ATF change at some other time just let me know.  I am in the wrkshop most weekends (except November)

Gaffers

Quote from: TheBoy on 21 October 2012, 21:49:25
Quote from: Marie on 21 October 2012, 20:15:14
I am up for doing a gearbox change. dont take long me and kevin had one out and in with in 4 hours  :)
What were you playing at?

Sassanach and I had one out, dismantled, investigated, and a replacement put in in 2 hours ;D

But, then, I think he's done it before. Several times ;D

And more recently, Sassanach and I had one out, new thrust washer fitted, and popped back in in about 90 mins.

The guy is a monster with these autoboxes :y

I'm not 100% sure she's talkin about gearboxes, Jammy.......

TheBoy

Quote from: Guffer on 21 October 2012, 23:40:49
Quote from: TheBoy on 21 October 2012, 21:49:25
Quote from: Marie on 21 October 2012, 20:15:14
I am up for doing a gearbox change. dont take long me and kevin had one out and in with in 4 hours  :)
What were you playing at?

Sassanach and I had one out, dismantled, investigated, and a replacement put in in 2 hours ;D

But, then, I think he's done it before. Several times ;D

And more recently, Sassanach and I had one out, new thrust washer fitted, and popped back in in about 90 mins.

The guy is a monster with these autoboxes :y

I'm not 100% sure she's talkin about gearboxes, Jammy.......
Ah, in that case, put me down for 30s, including a fag ;D
Grumpy old man

Shackeng

Quote from: Guffer on 21 October 2012, 23:38:43
I have a spare thrust washer kit here you can have, also if you want to bring the other miggy down for a ATF change at some other time just let me know.  I am in the wrkshop most weekends (except November)

That's very kind, I may well take you up on that, maybe in December? I've got the ATF, just waiting for the filter. :y :y :y