Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[albitz]

Also saves all the crap falling in your eyes and restricted access etc. Depends if bumper self tappers are seized up or not maybe.

[symes]

Location of S/L pump,with wing and bumper removed.

Cheers Albitz But think I found problem
The FUSE HOLDER   yes  said fuse holder=the Terminals that grip on fuse (being GM rubbish) were loose so used a tiny screwdriver to close  them up Put fuse in and now its working again-
Am still going to check it all saturday anyway so that I can familiarize myself to layout and operation 

[albitz]

Result by the sound of it.

[adey2]

has anyone ever tried standard springs in rather then the softer s/l ones with the shocks still in situ, cause mine has extra weight with lpg tanks wondered b4 i went for it

[05omegav6]

If your thinking along those lines, then fit plod springs

[feeutfo]

Any springs will work with sl shocks. Mv6, standard, plod(no direct experience but plod do use them with sl), elite springs all fine.


Note, if you have elite self levelling springs, these must be used with self levelling shocks, or the car will drag its arris along the ground.

[adey2]

i was planning keeping the shocks for the extra help but it is soft on ass end hence thinking fitting harder springs