Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Marks DTM Calib]

I suspect hes had to thread a lot more of the rod as its not been installed properly (e.g. over the diagnonal of the battery)

[Webby the Bear]

I suspect hes had to thread a lot more of the rod as its not been installed properly (e.g. over the diagnonal of the battery)

....as there wasn't enough threaded rod to wind the nut on to 

re installation.... even if i'd have fitted it quote ''properly'' unquote, i'd have still had to create a thread.

if I need to put it as taxi al says ill just replace rods with tent hooks as that's essentially what they are 

[05omegav6]

You do

[Sir Tigger KC]

When's the MOT? 

[VXL V6]

If you want it you can have the battery clamp and bolt off my dead DTi. 

[05omegav6]

Fit a different length battery and use another hole if you can't get that bolt out

[bigegg]

I spent an hour and a half drilling then bending a piece of steel lengthways to the correct angle to make a new battery clamp for my transit last year - against the clock cos it was booked in for MOT 

Got in van, and found the original in the door pocket. 

[omega3000]

I spent an hour and a half drilling then bending a piece of steel lengthways to the correct angle to make a new battery clamp for my transit last year - against the clock cos it was booked in for MOT 

Got in van, and found the original in the door pocket. 

 

Drilled mine out and fitted a smaller bolt through the hole with a nut on it .. job jobbed .