Topic: no idea what this pipe is (Read 1280 times)

78bex · « **on:** 08 August 2015, 00:21:16 »

but it`s started looking a tad perished

The pipe runs along the top of the offside chassis rail in the engine compartment That jubilee clip doesn`t look right either.
maybe I can cut it back past the rotten bit $:-\$

Blueron · « **Reply #1 on:** 08 August 2015, 05:50:46 »

Transmission to oil cooler pipes.Both mine have jubilee clips.Should be ok to cut bad bit out as long as there is enough spare will lose some transmission oil though.

Bigron · « **Reply #2 on:** 08 August 2015, 08:35:37 »

Silly suggestion?
To avoid losing ATF, if there's enough slack in the hose, loosen the jubilee clip and push the hose as far onto the pipe as possible and re-tighten the jubilee clip? Then just ignore the bad end of the hose.....

Ron.

78bex · « **Reply #3 on:** 08 August 2015, 14:57:26 »

Quote from: Bigron on 08 August 2015, 08:35:37

Silly suggestion?
To avoid losing ATF, if there's enough slack in the hose, loosen the jubilee clip and push the hose as far onto the pipe as possible and re-tighten the jubilee clip? Then just ignore the bad end of the hose.....

Ron.

Fixed it - cheers Ron

News:

Author Topic: no idea what this pipe is (Read 1280 times)

78bex

no idea what this pipe is

Blueron

Re: no idea what this pipe is

Bigron

Re: no idea what this pipe is

78bex

Re: no idea what this pipe is