Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Shackeng]

As above, the screen washer bottle filler neck and dipstick for a PFL or MFL.

TIA

[Doctor Gollum]

Will have a rummage, might have one 

[Shackeng]

 

[The Red Baron]

Got the neck and lid but no dipstick. 

[Shackeng]

Got the neck and lid but no dipstick. 

Thanks Jon, but not much use without it.

[The Red Baron]

Got the neck and lid but no dipstick. 

Thanks Jon, but not much use without it.

No.they usually fall off into the reservoir.

[Shackeng]

I'll take the whole screen washer bottle if someone has one.

[tidla]

Got the neck and lid but no dipstick. 

Thanks Jon, but not much use without it.

No.they usually fall off into the reservoir.

Thats where i keep mine.

[Bigron]

Mine too; I iknow it won't get lost there! 

Ron.

[Doctor Gollum]

Had a rummage but it isn't immediately obvious I know I had one as I acquired it especially for the plod one as the grill lights fouled the factory one, but it didn't reach the slam panel as the bottles are also different  so I didn't use it...

I did however find a good condition facelift bottle and neck, no lid... if that's of any use

It's a plod one, so has two pump fittings and no level sensor hole

[Shackeng]

Thanks Al, but I need the PFL or MFL one to replace my FL one, as I can see the yellow dipstick top through the grille, and the longer one cannot be seen.