News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

Imperial weights and measures

Started by STEMO, 14 March 2017, 17:11:41

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Lazydocker

Quote from: RumpelStiltSkin on 14 March 2017, 19:27:05
Quote from: Marks DTM Calib on 14 March 2017, 17:15:15
I guess anybody under about 45-50 would be mostly metric
Shit, that means I bat both ways.... :o
But we knew that anyway ::) ;D
Whatever it is... I didn't do it

Nick W

Quote from: Migv6 on 14 March 2017, 19:55:56
Imperial measures are far superior to metric. Metric is mickey mouse stuff, just like the Euro is mickey mouse money.
If I were undisputed leader I would outlaw metric with transgressors being hung from 2 yards of rope.  :P ;D


The actual measures are largely irrelevant. It makes no difference whether you measure something as 34.7mm or 493/787Snookums.
It's when you come to actually do something with that measurement that using a directly relatable system is worthwhile/sensible/rational/quicker/easier/less prone to cockups. Especially if it's one that everybody else has agreed upon.

Andy B

Quote from: Doctor Opti on 14 March 2017, 19:32:08....
4840 when I was at school. :)

You're  right ..... but not  a conversion I've  ever needed  :y

Field Marshal Dr. Opti

Quote from: Andy B on 14 March 2017, 20:32:37
Quote from: Doctor Opti on 14 March 2017, 19:32:08....
4840 when I was at school. :)

You're  right ..... but not  a conversion I've  ever needed  :y

That STMO chappie needs to stand in the corner wearing a pointy hat with a 'big D' on it.

Mister Rog

Quote from: Andy B on 14 March 2017, 18:29:34
Quote from: Mister Rog on 14 March 2017, 18:26:18
When I am total and unsputed ruler of Britain, I

::) ::)

Yes of course. "unsputed". Someone who's had the spute removed silly  ;)

"The desire to be a politician should bar you for life from ever becoming one." Billy Connolly

Andy B


Rods2

Quote from: Bigron on 14 March 2017, 17:48:19
The Hubble telescope was a tragic example of working with mixed measurements - but they were American!  ;D

Ron.

When they were calculating how concave the mirror needed to be on Hubble, somebody used a '+' instead of a '-' in the correction equation, but still :-[ :-[ :-[ where they forgot, check twice and machine once. ::) ::) ::)

When I worked on space stuff, the amount of checking, rechecking and quality control was unreal as when it is up there and it breaks there is very little you can normally do. :o :o :o
US Fracking and Saudi Arabia defending its market share = The good news of an oil glut, lower and lower prices for us and squeaky bum time for Putin!

Bigron

I'm sure stories abound about the cause of the problem (mainly due to blame-shifting!), but the way I heard it there were two teams working on the Primary Mirror (the bit that was wrong) and whereas one team were workinhg in Imperial measurements, the other team were working in metric and the conversions were not as accurate as they needed to be - hence my earlier statement.....

Ron.

ronnyd

Perhaps the guy who was supposed to be fitting my dear old Ma,s door last week had trouble with his imperial/ metric conversions. The new door was only 3" (75mm) too small. What a plonker. ::)

Ever Ready

I started working in Imperial, moved to Metric then started working for American companies who sent me all Imperial again.

I was working on a machine from Illinois last night with both Imperial & Metric fixings  ??? ???
An ounce of experience is worth more than a pound of enthusiasm.

zirk

Seems strange that we can still buy a Pint of Milk, but have to buy our Fuel in Litres, or would people just freak out if they knew they were paying £5.50 for a Gallon of petrol.

Andy B

Quote from: Ever Ready on 15 March 2017, 07:46:57....

I was working on a machine from Illinois last night with both Imperial & Metric fixings  ??? ???

All the machines in a machine shop I once worked in were imperial, a firm we did a lot of work for sent their drawing in metric, so the first 5mins of any new job was converting all the metric dimensions to imperial. It was common for tolerances to be given in thou on a metric dimension eg 100mm +/- 0.015"  ???  ;D ;D

X30XE

The only reasonable explanation for imperial I've ever heard is that in order to half a dimension all you needed to do was double the denominator.  Which meant that even retarded peasants stood half a chance in a world pre calculator  ;)
Omegatitis : [in remission]
Current "illnesses" : '00 740i | '00 728i |'00 S320 | '00 Discovery V8 | '03 9-5 HOT Aero | '06 Mini One  |  '98 406

BazaJT

Must admit I still convert measurements,torque settings back to Imperial.

TheBoy

Quote from: Lazydocker on 14 March 2017, 20:07:02
Quote from: RumpelStiltSkin on 14 March 2017, 19:27:05
Quote from: Marks DTM Calib on 14 March 2017, 17:15:15
I guess anybody under about 45-50 would be mostly metric
Shit, that means I bat both ways.... :o
But we knew that anyway ::) ;D
Only because to took me violently.  And you never rang me once afterwards :(

I feel used and dirty :P
Grumpy old man