News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

Welding...

Started by JDX, 30 June 2017, 19:38:00

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Webby the Bear

RIP Paul Lovejoy

ngrainqey

Personally I'd stick with stick welders if a beginner or not intending to go on a course etc - you buy electrodes to suit what you're welding and turn it up or down

I bought an ACDC tig welder a few weeks ago having only ever done stick, getting the hang of exhaust pipe now after practicing on sheet without filler, with filler, thicker stuff, then sheet and exhaust pipe - still wouldn't say I was good haha!  - There are a lot of variables: different thickness filler rods, tungsten grinding, gas coverage, heat, pulse for heating/cooling

Thanks
Alex
V8!!!!

JDX

Blimey, my head is spinning - there is so much to take in.. ::)

Migv6 le Frog Fan

I have a mate in Hedingham who is brilliant with anything to do with bikes and pretty good with a welder.
The problem is trying to get hold of him, and then hoping he is sober, as he likes a pint of cider or two twelve.  ::) ;D
Its weird being the same age as old people !

JDX

A welder who likes a drink Albs? :-\
Hmmn, interesting & dangerous combo.....handy he is so local though...

Marks DTM Calib

Take a look here:

www.mig-welding.co.uk

I would advise MIG for hobby/home use as its very universal and good for thin and thicker stuff.

Migv6 le Frog Fan

Ooh that looks like a useful site. Gone straight in my favourites.  :y
Its weird being the same age as old people !

Nick W

Quote from: Fuse 19 on 03 July 2017, 09:53:19
Take a look here:

www.mig-welding.co.uk

I would advise MIG for hobby/home use as its very universal and good for thin and thicker stuff.


This.


There isn't anything on a car you would choose to stickweld.


aaronjb

Quote from: Nick W on 03 July 2017, 10:17:12
This.


There isn't anything on a car you would choose to stickweld.

What about on a Defender?  ;) ;D

Marks DTM Calib

Quote from: aaronjb on 03 July 2017, 12:02:41
Quote from: Nick W on 03 July 2017, 10:17:12
This.


There isn't anything on a car you would choose to stickweld.

What about on a Defender?  ;) ;D

Still Mig. its easier to fill the holes you will keep blowing in the chassis as you hit yet another patch of rust  :y

aaronjb

Quote from: Fuse 19 on 03 July 2017, 13:22:51
Quote from: aaronjb on 03 July 2017, 12:02:41
Quote from: Nick W on 03 July 2017, 10:17:12
This.


There isn't anything on a car you would choose to stickweld.

What about on a Defender?  ;) ;D

Still Mig. its easier to fill the holes you will keep blowing in the chassis as you hit yet another patch of rust  :y
;D ;D ;D

TheBoy

Quote from: Fuse 19 on 03 July 2017, 13:22:51
Quote from: aaronjb on 03 July 2017, 12:02:41
Quote from: Nick W on 03 July 2017, 10:17:12
This.


There isn't anything on a car you would choose to stickweld.

What about on a Defender?  ;) ;D

Still Mig. its easier to fill the holes you will keep blowing in the chassis as you hit yet another patch of rust  :y
And I think the same applies to most of the pre-millennium designed Vauxhalls ;D.  Rust proofing? That's for poofs!
Grumpy old man

JDX

Poofs!! It's been a while since I've heard that....

JDX

Quote from: Fuse 19 on 03 July 2017, 09:53:19
Take a look here:

www.mig-welding.co.uk

I would advise MIG for hobby/home use as its very universal and good for thin and thicker stuff.
Very useful....thanks for that  :y

Webby the Bear

I taught myself with the help of here, the mig forum, YouTube and the internet.

However don't expect to become an expert in a day. I'm not going to lie. One day my welds will be awesome. The next day it won't flow and will be like turtle shite.

On these forums I see everyone saying it's easy. I don't think it is. But see how you get on 👍
RIP Paul Lovejoy