Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: 1 [2]  All   Go Down

Author Topic: Retrofit navi oem  (Read 10262 times)

0 Members and 1 Guest are viewing this topic.

VXL V6

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 9877
    • 530D M Sport, Elite 3.2
    • View Profile
Re: Retrofit navi oem
« Reply #15 on: 14 May 2018, 22:11:00 »
Quote from: olm on 14 May 2018, 21:05:19
Quote from: TheBoy on 14 May 2018, 18:31:33
No Vectra-C screen is compatible. So don't even begin to investigate that, you'll waste your time.

Although the half CAN Vectra-C screen looks the same, its electronically very different.  The full CAN setup used a completely different Navi HU and screen, such as CD70, which is not compatible with Omegas.


Compatible screens were fitted to Astra-G and Vectra-B (and Omegas of course), compatible NCDC201x were fitted to Omegas, early Vectra-C and Corsas (usually only NCDC2011).


All components in the ring (NAV, CD (separate device, even though bolted to bottom of NAV), screen and Telematics (if used)) need to be in depaired mode.

I've seen that piece of shit o p c o m pair these up successfully, I've also seen it screw them up. I'd entrust to a tech2.

The screen and the unit ncdc must be from the same set?

Yes, unless they already unpaired with Tech II
Logged

tunnie

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Surrey
  • Posts: 37593
    • Zafira Tourer & BMW 435i
    • View Profile
Re: Retrofit navi oem
« Reply #16 on: 14 May 2018, 22:16:23 »
Yes ideally, you can put CID/GID into “Delivery Mode” meaning you can pair to another NCDC, but it’s not reliable.

I like NCDC for factory feel look and integration with everything, but in my view it’s not worth hassle for navigation.
Logged

olm

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • spain
  • Posts: 262
    • 3.2 v6 sport estate
    • View Profile
Re: Retrofit navi oem
« Reply #17 on: 14 May 2018, 22:37:58 »
Quote from: VXL V6 on 14 May 2018, 22:11:00
Quote from: olm on 14 May 2018, 21:05:19
Quote from: TheBoy on 14 May 2018, 18:31:33
No Vectra-C screen is compatible. So don't even begin to investigate that, you'll waste your time.

Although the half CAN Vectra-C screen looks the same, its electronically very different.  The full CAN setup used a completely different Navi HU and screen, such as CD70, which is not compatible with Omegas.


Compatible screens were fitted to Astra-G and Vectra-B (and Omegas of course), compatible NCDC201x were fitted to Omegas, early Vectra-C and Corsas (usually only NCDC2011).


All components in the ring (NAV, CD (separate device, even though bolted to bottom of NAV), screen and Telematics (if used)) need to be in depaired mode.

I've seen that piece of shit o p c o m pair these up successfully, I've also seen it screw them up. I'd entrust to a tech2.

The screen and the unit ncdc must be from the same set?

Yes, unless they already unpaired with Tech II

If I have the tech ll can buy the unit and screen separately?
Logged

olm

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • spain
  • Posts: 262
    • 3.2 v6 sport estate
    • View Profile
Re: Retrofit navi oem
« Reply #18 on: 14 May 2018, 22:39:41 »
Quote from: tunnie on 14 May 2018, 22:16:23
Yes ideally, you can put CID/GID into “Delivery Mode” meaning you can pair to another NCDC, but it’s not reliable.

I like NCDC for factory feel look and integration with everything, but in my view it’s not worth hassle for navigation.


Yes, I only do for the integrated look, I love this
Logged

zirk

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Epping Forest
  • Posts: 11444
  • 3.2 Manual Special Saloon ReMapped and LPG'd and
    • 3.2 Manual Special Estate
    • View Profile
Re: Retrofit navi oem
« Reply #19 on: 15 May 2018, 01:34:32 »
Quote from: olm on 14 May 2018, 21:05:19
The screen and the unit ncdc must be from the same set?

Yes, I told you this 3 days ago -
Quote from: zirk on 13 May 2018, 02:56:15
Vectra C set up is not compatible, your need a NCDC (Bose configured) and a Paired Screen from an Omega.

Quote from: olm on 14 May 2018, 22:37:58
If I have the tech ll can buy the unit and screen separately?
Yes and No, only if they are in Delivery Mode, ie, they have been De Paired, and you have the Audio Pass Security Codes to Re Pair them.

All the above has been answered in your Post, you need to Re Read the replies, its all good info and will stop you going around in circles.  ;)
Logged

olm

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • spain
  • Posts: 262
    • 3.2 v6 sport estate
    • View Profile
Re: Retrofit navi oem
« Reply #20 on: 10 June 2018, 13:59:57 »
Another question, do I need the wiring from the unit and screen too? I see a unit and screen but not have the wiring
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30152
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Retrofit navi oem
« Reply #21 on: 10 June 2018, 17:10:19 »
Where in Spain are you?
Logged
Onanists always think outside the box.

olm

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • spain
  • Posts: 262
    • 3.2 v6 sport estate
    • View Profile
Re: Retrofit navi oem
« Reply #22 on: 10 June 2018, 22:10:16 »
No, internet
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107157
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Retrofit navi oem
« Reply #23 on: 11 June 2018, 12:58:22 »
Quote from: olm on 10 June 2018, 13:59:57
Another question, do I need the wiring from the unit and screen too? I see a unit and screen but not have the wiring
Depends what screen/HU are currently fitted. It is likely you will need to make an adapter due to slight differences between CCR2006 and NCDC201x looms.
Logged
Grumpy old man

olm

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • spain
  • Posts: 262
    • 3.2 v6 sport estate
    • View Profile
Re: Retrofit navi oem
« Reply #24 on: 11 June 2018, 13:00:47 »
Quote from: TheBoy on 11 June 2018, 12:58:22
Quote from: olm on 10 June 2018, 13:59:57
Another question, do I need the wiring from the unit and screen too? I see a unit and screen but not have the wiring
Depends what screen/HU are currently fitted. It is likely you will need to make an adapter due to slight differences between CCR2006 and NCDC201x looms.

I have CCRT2008
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30152
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Retrofit navi oem
« Reply #25 on: 11 June 2018, 14:22:05 »
Same... Need to switch various wires. Also need the RGB cable to connect the video aspect...

When I asked where you are, it was for the purposes of assistance...
Logged
Onanists always think outside the box.

olm

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • spain
  • Posts: 262
    • 3.2 v6 sport estate
    • View Profile
Re: Retrofit navi oem
« Reply #26 on: 11 June 2018, 15:53:37 »
Quote from: Doctor Gollum on 11 June 2018, 14:22:05
Same... Need to switch various wires. Also need the RGB cable to connect the video aspect...

When I asked where you are, it was for the purposes of assistance...

Ahh, ok, sorry,  I'm ciudad real, are you live in spain?
« Last Edit: 11 June 2018, 15:57:17 by olm »
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 30152
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: Retrofit navi oem
« Reply #27 on: 11 June 2018, 20:11:26 »
Sadly not, am currently in GC and would happily have assisted you if you were on the island :y
Logged
Onanists always think outside the box.
Pages: 1 [2]  All   Go Up
« previous next »
 

Page created in 0.015 seconds with 17 queries.