Primary feed is direct from battery with a 100A fuse (or two) and cut off key under the bonnet. Feed then runs to the boot and all the switching relays.
Items like radio were butchered into the feeds for rear lighter/behind the fuse panel.
Runlock was almost certainly spliced into the primary positive line from the ignition. I made my own using a couple of relays switched by the foot brake light switch and hand brake light switch. On an auto, the shift interlock would serve just as well.
When I bought mine direct in '09 I swapped out the interior and removed several meters of dead headed wiring from it. When it came to reinstalling everything more or less as was, I made my own looms routed the way everything had been when I had stripped it.
I had also acquired a pair of basic blue/red/headlight/siren boards which gave me all the foundation of how to wire it all up. Also the Optilink, siren and flasher units all came with a copy of the installation wiring diagrams. The light bar didn't, but I was readily able to get it online.
Net result was thus:
https://photos.app.goo.gl/xyXcLsEjwpYP8xqz7Obviously the Irmscher bits were swapped with standard, including the original 5 spoke 16"s. Note keys in tailgate lock and engine running

Sadly all the wiring diagrams went with the car. Last I heard, it was in Eire being battenburged.