Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Omega B 3.2 Exhaust Manifold Nuts. Drivers Side  (Read 1785 times)

0 Members and 1 Guest are viewing this topic.

tillers

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 19
    • View Profile
Omega B 3.2 Exhaust Manifold Nuts. Drivers Side
« on: 25 July 2020, 13:32:56 »
Hi All,
I have to change my exhaust manifold drivers side and would like to replace the nuts securing it to the block.
Can anyone advise what size they are please..   M8/M10?
Regards
Tillers
Logged

Enceladus

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • London
  • Posts: 1099
    • View Profile
Re: Omega B 3.2 Exhaust Manifold Nuts. Drivers Side
« Reply #1 on: 25 July 2020, 14:14:31 »
M8. As I recall that might also be all metal self locking. The distorted thread type.
Logged

biggriffin

  • Omega Lord
  • *****
  • Offline Offline
  • huntingdon, Hoof'land
  • Posts: 9842
    • It's Insignificant
    • View Profile
Re: Omega B 3.2 Exhaust Manifold Nuts. Drivers Side
« Reply #2 on: 25 July 2020, 14:34:00 »
M8, I used with spring washer and  washer.
Logged
Hoof'land storeman.

Nick W

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 11039
    • Ghastly 1.0l Focus
    • View Profile
Re: Omega B 3.2 Exhaust Manifold Nuts. Drivers Side
« Reply #3 on: 25 July 2020, 14:34:50 »
They're M8, and you use a 13mm spanner/socket.
You can get new manifold nuts anywhere. When I did the headgaskets on mine, I replaced all the studs, nuts and downpipe nuts with new for £5 to give you some idea
Logged

tillers

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 19
    • View Profile
Re: Omega B 3.2 Exhaust Manifold Nuts. Drivers Side
« Reply #4 on: 25 July 2020, 15:46:35 »
Quote from: Enceladus on 25 July 2020, 14:14:31
M8. As I recall that might also be all metal self locking. The distorted thread type.
.

Thanks for help much appreciated
Logged

tillers

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 19
    • View Profile
Re: Omega B 3.2 Exhaust Manifold Nuts. Drivers Side
« Reply #5 on: 25 July 2020, 15:47:19 »
Quote from: Nick W on 25 July 2020, 14:34:50
They're M8, and you use a 13mm spanner/socket.
You can get new manifold nuts anywhere. When I did the headgaskets on mine, I replaced all the studs, nuts and downpipe nuts with new for £5 to give you some idea
Thanks for help much appreciated
Logged

tillers

  • Newbie
  • *
  • Offline Offline
  • 0
  • Posts: 19
    • View Profile
Re: Omega B 3.2 Exhaust Manifold Nuts. Drivers Side
« Reply #6 on: 25 July 2020, 15:48:43 »
Quote from: biggriffin on 25 July 2020, 14:34:00
M8, I used with spring washer and  washer.
Thanks for help much appreciated
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.016 seconds with 17 queries.