Explain this one for me.
A friend of a friend had someone go in thier loft to do a job, it then seems whislt moving arrounf he held on to the indoor roof aerial and a copper pipe and got a burn from an electric shock.
They called the aerial installer who apparently didnt stop laughing. and said it was impossible to get an electric shock from an aerial.
An electrician was then called out and found no major fault, but tested all electrcal items in the house and found that 2 freeview box's were giving reading's of 10v and something else was reading 10v other item was the video recorder.
Now it seems all electrical items were turned off and then turned on one by one till these reading were found.
Now allthough these 3 figures were added together as told to me it was said that would be a 30v shock this person suffered.
Now my thinking is that none of these items should be showing a voltage, but if 1 item for example did show 10v (and at this point I dont know if this was on the case , a lead or input/output socket) then the same 10v would be showing from anything connected to it. (Hence 3 different items reading 10v each and sharing the shame aerial.
How would they be able to test thier own box with a multi metre.(By this I mean test the outer case for voltage, incase that was showing the 10|V as well) Plus is there any way or reason that 10v should be pressent. No sky box was mentioned as I said to my friend, I was aware the 2nd aerial output carries 9v to power a magic eye, but has to be switched on 1st.
TIA.
