Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tunnie]

Here is the kit i got off eGay, brand new:

Vaporizer





Valtek Injectors





Big loom!





More cable

[Lazydocker]

Right... Looks like all the wiring and connectors are there but no pipework at all. Oh, and can't see the level gauge and sender unit for the tank :-/ :-/

So, you need fill hose, Vent pipe and fittings, Liquid LPG Polyflex line and fittings (To run from back to front), coolant hose and connectors, vapour hose from Reducer to filter and filter to Injector rail, vapour hose from injector to nozzle (same hose can be used for Vacuum lines too) and all the relevant clips and connectors, and heat shrink

I'm assuming that the large wiring loom has the injector interrupt leads with plugs instead of stray wires?

[tunnie]

Right... Looks like all the wiring and connectors are there but no pipework at all. Oh, and can't see the level gauge and sender unit for the tank :-/ :-/

So, you need fill hose, Vent pipe and fittings, Liquid LPG Polyflex line and fittings (To run from back to front), coolant hose and connectors, vapour hose from Reducer to filter and filter to Injector rail, vapour hose from injector to nozzle (same hose can be used for Vacuum lines too) and all the relevant clips and connectors, and heat shrink

I'm assuming that the large wiring loom has the injector interrupt leads with plugs instead of stray wires?

Not too much then! 

Will the level gauge and sender unit come with a tank?  :-/

Already got some pipe work i used on another LPG project, but not sure if thats going to be too big.

Guess its worth calling Telio to get my all those bits above!

[tunnie]

Just called him, went through to his switch board? Left my details said they would get him to call me.

Tempted to ask him for the tank and pipework / connectors

[Lazydocker]

Just called him, went through to his switch board? Left my details said they would get him to call me.

Tempted to ask him for the tank and pipework / connectors

That's quite normal. Did they say whether he was out of the country?

I would ask him to quote for it TBH... It's worth a go

[tunnie]

Just called him, went through to his switch board? Left my details said they would get him to call me.

Tempted to ask him for the tank and pipework / connectors

That's quite normal. Did they say whether he was out of the country?

I would ask him to quote for it TBH... It's worth a go

I did't ask, but she did not know 

Do you just order over the phone once he has quoted?  :-/

[Lazydocker]

Just called him, went through to his switch board? Left my details said they would get him to call me.

Tempted to ask him for the tank and pipework / connectors

That's quite normal. Did they say whether he was out of the country?

I would ask him to quote for it TBH... It's worth a go

I did't ask, but she did not know 

Do you just order over the phone once he has quoted?  :-/

Yep... He'll order over the phone/via email. Just ring up with card details and he'll get it all shipped

[tunnie]

Just called him, went through to his switch board? Left my details said they would get him to call me.

Tempted to ask him for the tank and pipework / connectors

That's quite normal. Did they say whether he was out of the country?

I would ask him to quote for it TBH... It's worth a go

I did't ask, but she did not know 

Do you just order over the phone once he has quoted?  :-/

Yep... He'll order over the phone/via email. Just ring up with card details and he'll get it all shipped

Cheers, might get the tank and stuff from him too, just say i have the basic front end components, but no pipe work....

[Lazydocker]

Just called him, went through to his switch board? Left my details said they would get him to call me.

Tempted to ask him for the tank and pipework / connectors

That's quite normal. Did they say whether he was out of the country?

I would ask him to quote for it TBH... It's worth a go

I did't ask, but she did not know 

Do you just order over the phone once he has quoted?  :-/

Yep... He'll order over the phone/via email. Just ring up with card details and he'll get it all shipped

Cheers, might get the tank and stuff from him too, just say i have the basic front end components, but no pipe work....

He may ask to see the photo's and he'll sort it for you

He's a good egg... Just very busy!

[Kevin Wood]

FWIW, the tank frame, gauge, vent pipes and fittings, filler and pipe all came with the tank on my install.

So, if that's normal for one of Teilo's backend kits, you will need the kit as above, polyflex pipe and fittings, pipe clips, etc. to run the fuel line to the front and the 2 different sizes of LPG vapour hose (one about 13mm dia and the smaller hose to the nozzles about 5mm dia).

Only other items you'll need are heater hose, elbow fittings, etc. which won't be a problem. Unless there's something I've forgotten.

Kevin

[Kevin Wood]

.. and that ECU is nice and compact. 

I see there is a new version of the Stag 300 ECU out, as well - and a "UK distributor" http://www.autogassolutions.co.uk/stag-lpg-kit/new-stag-300-plus.

I must say, the 3D map sounds like a good move. I wonder if it's just a firmware update?

Kevin

[Lazydocker]

I stumbled on that site a week or so ago and I must ring Teilo and ask him about it... The problems he had with certification were because he was the sole (and first) importer of the kit... Now it seems another is doing so too :-/ :-/

I must confess, I'm tempted to see how much the course costs when I get my next one... Could be handy to have someone who can certify installations around :-? :-?

[Kevin Wood]

The are offering conversions as well.. Well, they are ONLY offering conversions as far as I can see. Couple of Omegas in their gallery section. LPGA badge on their web site.

I thought the issue with LPGA approval (if that's what you're talking about?) is that they audit your whole organisation rather then issue a personal qualification, so they want to see a workshop, administrative and accounting procedures, insurance, etc.

Kevin

[Lazydocker]

The are offering conversions as well.. Well, they are ONLY offering conversions as far as I can see. Couple of Omegas in their gallery section. LPGA badge on their web site.

I thought the issue with LPGA approval (if that's what you're talking about?) is that they audit your whole organisation rather then issue a personal qualification, so they want to see a workshop, administrative and accounting procedures, insurance, etc.

Kevin

That's how I interpreted it too but they say they do training courses (on your own vehicle) and issue a certificate at the end :-/ :-/

[Kevin Wood]

That's how I interpreted it too but they say they do training courses (on your own vehicle) and issue a certificate at the end :-/ :-/

A certificate for your vehicle or a certificate to say you can certify others?  :-/

TBH, the LPGA sound like the type of "jobs for the boys" outfit where as long as they get their couple of hundred quid a year for you to be "registered" (not "certified" or necessarily even "competent"!) they will see no evil.

If you charged a sensible rate to certify installs you'd have enough business on OOF to pay for the ticket for a year or two, I'd say.

Kevin