News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

Air compressors

Started by Jimbob, 16 December 2009, 09:05:58

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

TheBoy

QuoteTrouble is that the 8cfm is likely to be at around 50psi....which is the real limiting factor
is the gauge on the tank a decent indicator of things, even when powering guns etc?
Grumpy old man

Ken T

QuoteTrouble is that the 8cfm is likely to be at around 50psi....which is the real limiting factor

Its rated at 10bar working pressure. They're quite good, Hydrovane.  :y

Ken
I used to be indecisive; now I'm not so sure...

Marks DTM Calib

Quote
QuoteTrouble is that the 8cfm is likely to be at around 50psi....which is the real limiting factor
is the gauge on the tank a decent indicator of things, even when powering guns etc?

Only once the tank has dropped in volume

Marks DTM Calib

Quote
QuoteTrouble is that the 8cfm is likely to be at around 50psi....which is the real limiting factor

Its rated at 10bar working pressure. They're quite good, Hydrovane.  :y

Ken

Even a hydrovane wont deliver full volume at full pressure Ken, as good as they are (but require very good miantenance).