Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1] 2  All   Go Down

Author Topic: Drilled the Manifold for LPG nozzles  (Read 2798 times)

0 Members and 1 Guest are viewing this topic.

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Drilled the Manifold for LPG nozzles
« on: 03 June 2010, 21:22:03 »
Well after removing the fuel / electronics, I have drilled the fanimold on the V6 tonight for the LPG nozzles.....

I was really nervous about this job, but actually. it's not too bad, if you take your time and have a steady hand. I have managed to get my nozzles really close up against the petrol injectors, as per Kev's install, so am pleased :y

My only queestion are - I have a bit of a mixed bag of nozzles

I have 4 of the "usual" ones, with an 8mm hex fitting and I think a 4mm pipe connection, and 2 different (alan key fitting) ones.

Now, the internal diameters are the same on both - so flow shouldn't be an issue - but, would it affect it if I use 4mm pipe on the 4, and 5/6mm pipe on the other two? Would this affect flow?  :-/
« Last Edit: 03 June 2010, 21:24:12 by JamesV6CDX »
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107026
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #1 on: 03 June 2010, 22:51:50 »
That reminds me - I have 3 manifolds here to get to Mr Nozzle Driller, aka Mr Wood....
Logged
Grumpy old man

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #2 on: 03 June 2010, 23:03:49 »
Quote
That reminds me - I have 3 manifolds here to get to Mr Nozzle Driller, aka Mr Wood....

Have a go Jaime - is a peice of cake if you take your time :y
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107026
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #3 on: 03 June 2010, 23:05:22 »
Quote
Quote
That reminds me - I have 3 manifolds here to get to Mr Nozzle Driller, aka Mr Wood....

Have a go Jaime - is a peice of cake if you take your time :y
I've Kevin already done mine, been on LPG for a few weeks.  These are spares that Kevin was going to get predrilled for other members considering LPG...
Logged
Grumpy old man

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #4 on: 03 June 2010, 23:07:12 »
Quote
Quote
Quote
That reminds me - I have 3 manifolds here to get to Mr Nozzle Driller, aka Mr Wood....

Have a go Jaime - is a peice of cake if you take your time :y
I've Kevin already done mine, been on LPG for a few weeks.  These are spares that Kevin was going to get predrilled for other members considering LPG...

If it's not particularly urgent, I could collect them and do them when I come and badger you for ECU updates  :D :y
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #5 on: 03 June 2010, 23:07:38 »
Quote
Quote
Quote
That reminds me - I have 3 manifolds here to get to Mr Nozzle Driller, aka Mr Wood....

Have a go Jaime - is a peice of cake if you take your time :y
I've Kevin already done mine, been on LPG for a few weeks.  These are spares that Kevin was going to get predrilled for other members considering LPG...

I've already got a couple of spares from you. Are there more? :o

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107026
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #6 on: 03 June 2010, 23:11:34 »
Quote
Quote
Quote
Quote
That reminds me - I have 3 manifolds here to get to Mr Nozzle Driller, aka Mr Wood....

Have a go Jaime - is a peice of cake if you take your time :y
I've Kevin already done mine, been on LPG for a few weeks.  These are spares that Kevin was going to get predrilled for other members considering LPG...

I've already got a couple of spares from you. Are there more? :o

Kevin
3 on my garage floor.  I think 2 x 2.5 and 1 x 3.0....
Logged
Grumpy old man

VXL V6

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 9874
    • 530D M Sport, Elite 3.2
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #7 on: 03 June 2010, 23:24:36 »
And I have a spare one to swap for a drilled one from Mr Wood at The Lakes.  :y
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #8 on: 03 June 2010, 23:37:25 »
Quote
And I have a spare one to swap for a drilled one from Mr Wood at The Lakes.  :y

Glad you reminded me. :-[  ::)

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #9 on: 03 June 2010, 23:39:04 »
Quote
3 on my garage floor.  I think 2 x 2.5 and 1 x 3.0....

I think all the ones I currently have are 3.0 so the 2.5s would certainly be worth hanging on to.

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

VXL V6

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 9874
    • 530D M Sport, Elite 3.2
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #10 on: 03 June 2010, 23:41:45 »
Quote
Quote
And I have a spare one to swap for a drilled one from Mr Wood at The Lakes.  :y

Glad you reminded me. :-[  ::)

Kevin

The spare one I have is a 3.0 one which I presume is the same as a 3.2 one?
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #11 on: 03 June 2010, 23:52:58 »
Quote
The spare one I have is a 3.0 one which I presume is the same as a 3.2 one?

Yes, I think so.

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

feeutfo

  • Guest
Re: Drilled the Manifold for LPG nozzles
« Reply #12 on: 04 June 2010, 00:55:30 »
whats the differance? thought the inlet was the same tbh? :-/
Logged

Kevin Wood

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Alton, Hampshire
  • Posts: 36417
    • Jaguar XE 25t, Westfield
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #13 on: 04 June 2010, 10:12:08 »
Quote
whats the differance? thought the inlet was the same tbh? :-/

There's a mark in the casting indicating which is which. Either "25" or "30". I assume the ports are slightly narrower on the 2.5 but don't have a pair to compare.

Kevin
Logged
Tech2 services currently available. See TheBoy's price list: http://theboy.omegaowners.com/

JamesV6CDX

  • Omega Queen
  • *****
  • Offline Offline
  • Gloucestershire/Buckinghamshire
  • Posts: 16640
    • Omega 3.2 Retail MV6 LPG
    • View Profile
Re: Drilled the Manifold for LPG nozzles
« Reply #14 on: 04 June 2010, 11:59:41 »
Any of you chaps have any thoughts re my nozzle/pipe query?  (first post) :)
Logged
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.01 seconds with 17 queries.