Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: 2.0 Ecotec rocker cover gasket.  (Read 1580 times)

0 Members and 1 Guest are viewing this topic.

flymike

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Nottingham
  • Posts: 15
    • View Profile
2.0 Ecotec rocker cover gasket.
« on: 24 August 2006, 11:25:52 »
I have changed my rocker cover gasket three times and the dam thing still leeks. Is there any sealant i can use to help it?

I think the breather pipes need cleaning so that my job for the weekend and it should help it a little.
Logged

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: 2.0 Ecotec rocker cover gasket.
« Reply #1 on: 24 August 2006, 11:46:56 »
Hi there

This is one of things I think needs redoing, as mine has a leak but I think its from the front behind the Cams

This thread gives you the part number for the sealant
http://www.omegaowners.com/forum/YaBB.pl?num=1156308281

Good Luck with it  :)
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 33984
  • Git!
    • View Profile
Re: 2.0 Ecotec rocker cover gasket.
« Reply #2 on: 24 August 2006, 11:47:14 »
Its the breatehrs that are the problem....the oil will find the weakest seal if the system is pressurised and that will be the cam cover gasket.....be thankful as if it was sealed better it would probably be the crank seal...or worse!
Logged

nixoro

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Hitchin, Herts
  • Posts: 2902
    • View Profile
Re: 2.0 Ecotec rocker cover gasket.
« Reply #3 on: 24 August 2006, 12:37:17 »
Quote
Its the breatehrs that are the problem....the oil will find the weakest seal if the system is pressurised and that will be the cam cover gasket.....be thankful as if it was sealed better it would probably be the crank seal...or worse!

This is more than likely my problem only I think the flame trap is gunked up along with the rear breather pipe.

Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.015 seconds with 16 queries.