Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[MarkG]

.....you chnaged BOTH coil packs? What do you mean? There is only one and its a bugger to get at tucked up at the back of the engine virtually on top of the gearbox

[dbug]

.....you chnaged BOTH coil packs? What do you mean? There is only one and its a bugger to get at tucked up at the back of the engine virtually on top of the gearbox

Its a 2.6 V6 DBW!!

[Big_Roger]

Note, He has the coil per plug system fitted to the 2.6 and 3.2 Omegas

This is individual HT coils per spark plug, mounted as a group of three  directly over each bank of spark plugs.  No plug HT leads at all.

HTH

Roger

[denisaok]

That will check for leaks tomorrow

[denisaok]

Hi all for the help

I found a leak on the nut that connets the main brake servo pipe to the plenum .(Brakes seem fine now )Then put car back onto tech 2 cleared all the fault codes but then the car would not start up I got it to start about five min later an read codes again P0650 came back cleared the codes again and it did the same thing would not start got it started again and p0650 is still there. Done about 40 miles since and no miss fire dont know if that means its fixed ?  

Help I dont know what to do now about the p0650 code also no fault lights are on

[denisaok]

hi all
I had a dream last night about my last post no fault lights are on so i got up this morring and checked the engine management light bulb and found thet it had blown have not had a chance to to it back on tech 2 yet could the be why fault code P0650 is stored. Car seems to be running alright now ?