Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: Fog Light Removal and Replacement  (Read 1789 times)

0 Members and 2 Guests are viewing this topic.

GG

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Milton Keynes
  • Posts: 363
  • If kicking doesn't work, then hit it with a hammer
    • View Profile
Fog Light Removal and Replacement
« on: 05 April 2009, 21:43:41 »
Fortunately/Unfortunately for me the previous owner of car couldn't afford to run it  :( :).

The result was a low mileage car that spent most of it's time parked up, luckily I bought it from a dealer with a warranty and got most of the problems associated with a parked up car resolved including the garden of moss that had grown every, but I was never happy with the yellow fog lights (which i had assumed were some stupid installation)

This weekend I visited another member of the forum who pointed out that my fog lights were not yellow, but had a garden inside, stupid me  >:(

How do I remove them, clean the lense and reinstall. Is this a pain in the arse task or can it be simply done.

Any help welcome for the dimwit with NOT yellow lights  :o :o
« Last Edit: 05 April 2009, 21:45:25 by grahamandnatalie »
Logged

eddie

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Cardiff
  • Posts: 352
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #1 on: 05 April 2009, 21:55:31 »
Remove the dummy grill,2xtorx bolts and you will have access to the (phillips) screws holding the foglight in place. Unfortunately the lens's are not removable--you will have to fill with water and a bit of bleach and a piece of cloth. Then give it a good cocktail shake!

eddie
Logged

GG

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Milton Keynes
  • Posts: 363
  • If kicking doesn't work, then hit it with a hammer
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #2 on: 05 April 2009, 22:10:29 »
Thanks, i have day off tomorrow so I will be looking forward to this task  :-?
« Last Edit: 05 April 2009, 22:10:38 by grahamandnatalie »
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #3 on: 05 April 2009, 22:12:05 »
Following on from what eddie said .. you might find a small "bottle brush" of the type sold to clean babies bottles usefull as you can bend the head to shape to clean inside the light from the back .. :)
Logged

GG

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Milton Keynes
  • Posts: 363
  • If kicking doesn't work, then hit it with a hammer
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #4 on: 05 April 2009, 22:15:33 »
Quote
Following on from what eddie said .. you might find a small "bottle brush" of the type sold to clean babies bottles usefull as you can bend the head to shape to clean inside the light from the back .. :)

I hadn't thought of that, they are pure yellowy green so that could be first on my shopping list tomorrow  :)
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #5 on: 05 April 2009, 22:27:02 »
Quote
Quote
Following on from what eddie said .. you might find a small "bottle brush" of the type sold to clean babies bottles usefull as you can bend the head to shape to clean inside the light from the back .. :)

I hadn't thought of that, they are pure yellowy green so that could be first on my shopping list tomorrow  :)

Sounds like algae growth ... if it has dried and gone hard .. leave it to soak in warm water for an hour then use the bottle brush ... :)
Logged

GG

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Milton Keynes
  • Posts: 363
  • If kicking doesn't work, then hit it with a hammer
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #6 on: 05 April 2009, 22:32:50 »
Quote
Quote
Quote
Following on from what eddie said .. you might find a small "bottle brush" of the type sold to clean babies bottles usefull as you can bend the head to shape to clean inside the light from the back .. :)


I hadn't thought of that, they are pure yellowy green so that could be first on my shopping list tomorrow  :)

Sounds like algae growth ... if it has dried and gone hard .. leave it to soak in warm water for an hour then use the bottle brush ... :)

I think this maybe required cos there is no dampness in there :)
« Last Edit: 05 April 2009, 22:33:29 by grahamandnatalie »
Logged

Richard148

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • solihull. w,mids
  • Posts: 94
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #7 on: 05 April 2009, 22:36:38 »
if it is algae go to some where that sell aquariums fish etc and you can buy agents that will clear it easily
Logged

Entwood

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • North Wiltshire
  • Posts: 19566
  • My Old 3.2 V6 Elite (LPG)
    • Audi A6 Allroad 3.0 DTI
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #8 on: 05 April 2009, 22:48:41 »
Quote
if it is algae go to some where that sell aquariums fish etc and you can buy agents that will clear it easily

As a fish keeper there is a small problem with your idea .... I'm sorry to say .. :(

The algae that occurs in fish tanks is on surfaces that are covered in water all the time, so the algae is "alive".. it can therefore be affected by chemicals added to the water to "kill" it, although the dead residue must then be cleaned off.

The algae in the foglights is probably similar to the algae that grows on trees, paths etc and is not permanantley immersed in water, so is of a different type. It probably will not react to the aqaurium solutions. When exposed to "dry" conditions this form of algae goes dormant and hard (try scraping a path) but when wet it goes soft again, which is why power washers work so well.

Unfortunately trying to point a power washer into a foglight might be a tad tricky !!! (but I'd like to watch someone try !  :) )
Logged

GG

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Milton Keynes
  • Posts: 363
  • If kicking doesn't work, then hit it with a hammer
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #9 on: 05 April 2009, 22:50:32 »
Quote
if it is algae go to some where that sell aquariums fish etc and you can buy agents that will clear it easily


I have tropical fish and that stuff doesn't work with wet algae, let alone dry, it just messes up the ecology in your tank.  :)

Thanks anyway  :y
Logged

Richard148

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • solihull. w,mids
  • Posts: 94
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #10 on: 05 April 2009, 23:46:51 »
it was just an idea  :)

try caustic soda :y that will get rid of the light all together LOL
Logged

GG

  • Intermediate Member
  • ***
  • Offline Offline
  • Gender: Male
  • Milton Keynes
  • Posts: 363
  • If kicking doesn't work, then hit it with a hammer
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #11 on: 06 April 2009, 00:06:30 »
Believe hammer will repair it too  ;D ;D ;D
Logged

semisheen

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Chesterfield
  • Posts: 213
    • View Profile
Re: Fog Light Removal and Replacement
« Reply #12 on: 06 April 2009, 01:40:46 »
Pehaps he could just leave them as theu are & just get some small tropical fish to put in his headlights ......sorry its late  :P
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.028 seconds with 17 queries.