Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Shrek]

I recently got some GM rear brake pads on a well known auction site .
They are part number 9193476 which i now understand means they are heavy duty pads .
Does this matter ?  I'm planning on doing the discs as well at the time so is there any preference on disc make as i see rear discs arn't on trade club.
I have looked at the guide on rear disc service , however in my box there are 2 metal shims so where do these fit.. ie shim to piston and also which way do the pins go through or does it matter ?
Pins have a collar below the "head"
I realise i will probly find out these questions when i come to do the job but i like to have no suprises 
Thanks 

[Andy B]

....
 so is there any preference on disc make as i see rear discs arn't on trade club. .....

Says who?     

Omega Part Number Retail Price Normal Trade Trade Club
Brake discs/drums, rear
Solid discs/drums to '00                               90444513 £94.00 £79.96 £65.81

 
Ventilated discs/drums from '01                              93182287 £94.00 £80.15 £68.05


The pins go from the inside of the caliper, you can't fit them wrong. Removal requires a pin punch around 1/8" dia, you knock the pins through from the outer side. Not sure about the shims if there are only 2, cos there's 2 pistons per caliper, so one piston would lose out where ever you fitted them 

[Shrek]

Mmm i had a look on the site and it listed the front disc set but i couldnt find the rear .
Thats handy though , Thanks for the part number 

[Andy B]

Mmm i had a look on the site and it listed the front disc set but i couldnt find the rear .
Thats handy though , Thanks for the part number 

confusingly, if you look at the rear axle set on the TC page, it then says no matches found  :-?  :-?  :-?

[Shrek]

Mmm i had a look on the site and it listed the front disc set but i couldnt find the rear .
Thats handy though , Thanks for the part number 

confusingly, if you look at the rear axle set on the TC page, it then says no matches found  :-?  :-?  :-?

Yes thats what i found as well  :-/

[Andy B]

....
Pins have a collar below the "head"  .....

Like these? ....... 



http://www.buypartsby.co.uk/brake-fitting-kits-buy.php

[Shrek]

....
Pins have a collar below the "head"  .....

Like these? ....... 



http://www.buypartsby.co.uk/brake-fitting-kits-buy.php

Yes thats the very ones .

Mmm i wonder why there are these 2 thin metal shim things as well then  :-/

[Andy B]

.....

Mmm i wonder why there are these 2 thin metal shim things as well then  :-/

They locate under the pins & press on top of the pads to stop them rattling about in th caliper. 

[Shrek]

Oopps i just went into the box again and found the other two thin shims wrapped up in amoungst the information sheet thing  ... i feel like a tube now    so i have four metal shims after all 

[Shrek]

Found the other two