Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[V6braveheart]

First of all Merry Christmas to all.

Can any body help me out with a problem with my car I have a 2001 3.0 V6 Elite. My dipped beam has set at the lowest level and will not adjust automatically as normal. can they be adjusted manually or do I have to pay out for new adjusters from main stealers.

Cheers for any input
 

[RobG]

Any message on info display? Both lights or just one?

[hotel21]

Just to confirm, proper factory fit HID's or xenon lamps fitted to existing lamps?

Any adjuster wheel to the left of the headlamp operating switch?

[V6braveheart]

Yeah a message on the onboard comp says FLD/VISION, MAIN BEAM

[V6braveheart]

There is no adjuster wheel next to the light switch,Factory fitted and its both lights.

[hotel21]

Yeah a message on the onboard comp says FLD/VISION, MAIN BEAM

Usual culprit is the adjuster arm coming adrift on the front nearside suspension arm.  Will link a pic in a minute or so...   

edit - pic here....  Sensor is roughly in the centre of the picture.

http://www.omegaowners.com/forum/YaBB.pl?num=1219190177

[Andy B]

you need a diagnostic check done on your car or keep guessing .....  .
It's either a level switch on the front nearside wishbone or rear near side radius arm or a level motor in either of your headlamps

Individual lights are adjusted in the standard way with adjusters on eack light - assuming they aren't broken inside. 

[V6braveheart]

cheers will try out and will let you know 

[V6braveheart]

Found the problem, where the HID adjuster arm plugs into the rear of the HID sensor has come out. tried to plug it in but think it might be U/S now. ?