Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: -94 Omega & Cruise problem

« on: 25 November 2008, 07:19:55 »

... Does anybody now which wire means what on cruise motor connection?

Can't you read that from the wiring diagram ?

Yes, now I found right wire, thanks a lot! Tomorrow I'll go to local vauxhall dealer (or as we said Opel). My old friend is working there and he will try out if tech update for ecu will help enable cruise.

Again very bad english, sorry  

-Joni from Finland

2

Omega General Help / Re: -94 Omega & Cruise problem

« on: 24 November 2008, 09:12:00 »

Now i have chekked all connection again change the fuse and etc. But cruise still no working. Is there possibility to test cruise stalk or cruise motor itself by leading power to it?
Does anybody now which wire means what on cruise motor connection?

3

Omega General Help / Re: -94 Omega & Cruise problem

« on: 21 November 2008, 13:03:43 »

have you fitted the four pin brake switch ?? :-/

No, becuse I have only 2wires coming to brake switch. 4pin brake switch is needed only ~from 98->.

Should I just program cruise to ecu with Tech in service??

4

Omega General Help / Re: -94 Omega & Cruise problem

« on: 20 November 2008, 13:54:06 »

Still help needed!  :-?

5

Omega General Help / Re: -94 Omega & Cruise problem

« on: 19 November 2008, 13:03:44 »

So, because I didn't found wiring loom for cruise from my car I started to fit it to My dad's -96 GL 2.0 8v (X20SE).

I added cruise motor under bonnet and connect wire to thortle body. After that I put new cruise stalk to it's place and clutch switch in place.
After that I go to test drive and  .. cruise didn't work.
I don't have any clue why it doesn't work. I have allready check all connections etc.
I also checkked wiring diagrams and I notised that cruise is controlled by a relay K14 on my model. Where is this relay if could check that is it in place.

I hope you understand my language and answer to my questions  

-Joni from cold Finland

6

Omega General Help / Re: -94 Omega & Cruise problem

« on: 06 November 2008, 17:00:17 »

Actually in Finland we have only GL and CD-models and I have that GL.

My dad own's other -96 GL 2.0 8v (X20SE) Omega and I found a connector to cruise from my dad's car but not on my own  :-?
And my friend had also Opel Omega 2.0 16v GL and in has car also was option to add cruise  :-?

7

Omega General Help / Re: -94 Omega & Cruise problem

« on: 06 November 2008, 15:12:47 »

is it the 2.0 8v?

I seam to remember the 8vs did not have the loom in place?  :-/

No, my car is x20xev= 2.0 16v petrol with manual transmission

By spec I mean GLS, CD, CDX etc

Sorry, it's GL(S?)  

8

Omega General Help / Re: -94 Omega & Cruise problem

« on: 06 November 2008, 14:24:41 »

is it the 2.0 8v?

I seam to remember the 8vs did not have the loom in place?  :-/

No, my car is x20xev= 2.0 16v petrol with manual transmission

9

Omega General Help / -94 Omega & Cruise problem

« on: 06 November 2008, 13:55:41 »

Hello,
I have a problem fitting cruise control head unit to my -94 X20XEV Omega. Problem is that I don't even find connector wire to cruise head unit wich is under bonnet??  :-/

So do -94 models even have electrial wiring for cruise?

And sorry my bad english, I'm from Finland and my english skills just aren't so good as yours  

A pic below (no wiring at all??), just a place to cruise unit..
http://i295.photobucket.com/albums/mm150/Jonizky/06112008.jpg

http://i295.photobucket.com/albums/mm150/Jonizky/06112008001.jpg