Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[A1TNL]

Some pics of me removing my DIS pack from my omega v6 3.0

Maybe they can be used to as part of the guide for removal

[Tafty]

^^^^ Nothing showing am afraid :-?

Edit: Super job - showing now

[A1TNL]

could someone confirm the pics are showing ok now

Thanks

[albitz]

They are.

[Pete Elite]

  That dispack is well shot .

 PS. Just for your info, it would be best in future to stick some rag or kitchen paper in the inlet manifolds in case you drop a bolt etc. down them .

[eddie]

Yikes! Thats one rotten Coil Pack,when I took mine out I had a problem telling it from the new one.

It is a bit easier if you clear all the bits away from the engine area though. I also removed all the wiper mechanism retaining screws to get that extra millimetre of clearance.

I must say that since I changed mine it is like having a new car,so smooth and punchy. I take the long way home just for fun now!

eddie

[Andy B]

Yikes! Thats one rotten Coil Pack,when I took mine out I had a problem telling it from the new one. .......

Although mine wasn't quite as bad as that, mine had started to split due to corrosion of the coils.

[A1TNL]

 That dispack is well shot .

 PS. Just for your info, it would be best in future to stick some rag or kitchen paper in the inlet manifolds in case you drop a bolt etc. down them .

You are write with the kitchen paper, i did nearly lose a bolt

[ngrainqey]

just two points/questions....
how many torx bolts are there holding the dis pack on and also whats on the bottom of the dis pack? 6 plugs or what?

thanks (on about swapping mine thats all)

[Andy B]

just two points/questions....
how many torx bolts are there holding the dis pack on and also whats on the bottom of the dis pack? 6 plugs or what?

thanks (on about swapping mine thats all)

There are 4 /torx bolts holding it, I used an 8 mm 1/4" drive hexagonal socket though as my Torx were too fat to fit.
Bottom? Not sure what you mean. You can see in the picture where the 6 HT leads plug into the DIS and at the end of the DIS not shown there's a 4? pin socket for the LT/ECU

[ngrainqey]

just two points/questions....
how many torx bolts are there holding the dis pack on and also whats on the bottom of the dis pack? 6 plugs or what?

thanks (on about swapping mine thats all)

There are 4 /torx bolts holding it, I used an 8 mm 1/4" drive hexagonal socket though as my Torx were too fat to fit.
Bottom? Not sure what you mean. You can see in the picture where the 6 HT leads plug into the DIS and at the end of the DIS not shown there's a 4? pin socket for the LT/ECU

the 4 pin sockety thing you mentioned is what i was after

[Andy B]

just two points/questions....
how many torx bolts are there holding the dis pack on and also whats on the bottom of the dis pack? 6 plugs or what?

thanks (on about swapping mine thats all)

There are 4 /torx bolts holding it, I used an 8 mm 1/4" drive hexagonal socket though as my Torx were too fat to fit.
Bottom? Not sure what you mean. You can see in the picture where the 6 HT leads plug into the DIS and at the end of the DIS not shown there's a 4? pin socket for the LT/ECU

the 4 pin sockety thing you mentioned is what i was after

Be aware that there are 3 different DIS packs fitted, and it's the 4? pin plug that's different .... I think :-/    
I gave Vauxhall the Bosch number for my replacement, who price matched ..... errrrr .... someone else

[bighed]

Funny.... Just done mine today (pics on my help please post.) and mine was cracked although not that bad. Told its from failed hbv. Are u loosing coolant at all??

[ngrainqey]

lol... only  
what is with vauxhall and changing things... sometimes for the worse...
two crank sensors later which is like twice as expensive, 2 headlight adjusters.. later ones break..3 dispacks...and then the fact theres prefacelift minifacelift and facelift models...
can they not just let a miggy be?

[bth2bth2]

hey...just looks like mine did !!!!

[Auto Addict]

Images moved to here http://www.omegaowners.com/forum/YaBB.pl?num=1155224533/0#1