Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Too many tubes at the back of my engine  (Read 1135 times)

0 Members and 1 Guest are viewing this topic.

J.S.B.

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Colchester, Essex
  • Posts: 69
    • 2.5v6 Elite
    • View Profile
Too many tubes at the back of my engine
« on: 30 October 2011, 18:12:08 »
Hi,

I've almost completed replacing my rocker cover gaskets, sparks & leads, dis pack, broken rocker cover ( damn that stupid wire) and I have now got 5 tubes where there are only 4 pipes to stick them on at the back of the breather thing over the plenum.

I have two from the y split, and then two more which fit the middle two pipes, but then I have a shaped tube coming from a little device on the back left (135) bank which is too small to fit any of the 4 pipes on the plastic bit over the plenum. The device has a tube which goes off towards the driver wheel, the tube I'm confused about and an electrical connector.

I'm assuming I've just missed connecting to something but I can't see what it should connet to any ideas please?

Regards

J
Logged
Things to do: Air Con still leaking

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 105972
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: Too many tubes at the back of my engine
« Reply #1 on: 30 October 2011, 18:12:57 »
Auto?

One isautobox breather
Logged
Grumpy old man

Osprey

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Redhill, Surrey
  • Posts: 677
  • Drink up. The world's about to end.
    • 01 2.6 Elite saloon
    • View Profile
Re: Too many tubes at the back of my engine
« Reply #2 on: 30 October 2011, 19:51:31 »
+1 for auto box breather - shouldn't be connected to anything. 

It couldn't be the twisty little pipe to the rear multiram could it?

Any chance of a picture?

Logged
I feel like a military academy. Bits of me keep passing out.

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Too many tubes at the back of my engine
« Reply #3 on: 30 October 2011, 20:46:08 »
Quote from: J.S.B. on 30 October 2011, 18:12:08
Hi,

I've almost completed replacing my rocker cover gaskets, sparks & leads, dis pack, broken rocker cover ( damn that stupid wire) and I have now got 5 tubes where there are only 4 pipes to stick them on at the back of the breather thing over the plenum.

I have two from the y split, and then two more which fit the middle two pipes, but then I have a shaped tube coming from a little device on the back left (135) bank which is too small to fit any of the 4 pipes on the plastic bit over the plenum. The device has a tube which goes off towards the driver wheel, the tube I'm confused about and an electrical connector.

I'm assuming I've just missed connecting to something but I can't see what it should connet to any ideas please?

Regards

J
The device is the purge valve, one pipe as you say goes to the charcoal canister in the driver`s wing area, the other should be connected to the breather box, looking from front, the 3rd outlet counting from L to R
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

Tony H

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • liverpool
  • Posts: 4940
  • Black Elites are luurvley
    • View Profile
Re: Too many tubes at the back of my engine
« Reply #4 on: 30 October 2011, 20:48:29 »
Auto box breather should be fixed pointing up towards the inside of the bonnet at the rear of the breather box
Logged
Be aware of mole holes be very aware!

Osprey

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Redhill, Surrey
  • Posts: 677
  • Drink up. The world's about to end.
    • 01 2.6 Elite saloon
    • View Profile
Re: Too many tubes at the back of my engine
« Reply #5 on: 30 October 2011, 22:29:50 »
Quote from: RobG on 30 October 2011, 20:46:08
The device is the purge valve, one pipe as you say goes to the charcoal canister in the driver`s wing area, the other should be connected to the breather box, looking from front, the 3rd outlet counting from L to R

Ah yes - that makes a lot more sense.  Sorry if my suggestion was misleading!
Logged
I feel like a military academy. Bits of me keep passing out.

J.S.B.

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Colchester, Essex
  • Posts: 69
    • 2.5v6 Elite
    • View Profile
Re: Too many tubes at the back of my engine
« Reply #6 on: 30 October 2011, 22:47:18 »
Hi guys,

Thanks for the replies. It is indeed the autobox breather I remember it just being cable tied at the back of everything. Usually I take pictures as I work but I didn't have one for this pipe.

My car is now back in action thanks to the forum, guides, and Twiglet. Along with good advice from peeps at the Essex meet :y

Thanks all  ;D
Logged
Things to do: Air Con still leaking

Bionic

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Leicester
  • Posts: 1300
  • Why drive anything else?
    • 1999 F/L 3.0 Elite saloon
    • View Profile
Re: Too many tubes at the back of my engine
« Reply #7 on: 31 October 2011, 06:04:36 »
 The biggest is the autobox breather and it hangs loose but I clipped mine to the bulkhead for safety.
:o Begs the question of why you did not mark them though? Maybe next time eh?  :y
Logged
Too old to suffer, too young to die!
Autobahnstormers Trade Cards now accepted at Drive Leicester and at Marshall's Vauxhall.
Pages: [1]   Go Up
« previous next »
 

Page created in 0.013 seconds with 18 queries.