Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: rikki_essex on 03 March 2013, 19:46:04
-
Evening all i bought my car a few week ago and its just gone through the MOT with no problems but there a few little bits that i need help with. I need to get the drivers door motor as it doesnt work from the fob but did work on the key. I say did because up until tonight it was working fine but now will not unlock it so you have to jump in a pull it from the passangers side. If i replace the door motor will i need to replace the barrell aswell now?
-
If i replace the door motor will i need to replace the barrell aswell now
Nope
-
Cheers Rob is it best to get one from vx or will a second hand one do all so i need to replace the d/s rear window mech is that a big job?
-
Cheers Rob is it best to get one from vx or will a second hand one do all so i need to replace the d/s rear window mech is that a big job?
Known good S/H is OK or replace the microswitches (guide in maintenance). Rear window mech, just a case of removing doorcard & drilling out the rivets (3 IIRC)
-
Thanks very much Rob. With regards to the rear window im assuming its the motor but when you try to operate it it just makes a bit of a grinding noise would you say the motor needs replacing or some thing else wrong?
-
Thanks very much Rob. With regards to the rear window im assuming its the motor but when you try to operate it it just makes a bit of a grinding noise would you say the motor needs replacing or some thing else wrong?
With the doorcard & membrane removed do a visual & aural check of the motor whilst depressing the switch
-
ok will do thanks for your help Rob