Omega Owners Forum
Chat Area => General Car Chat => Topic started by: plym ian on 04 July 2014, 12:07:52
-
After fitting my cruise stalk to my 2.2 cd the other week I kept on forgetting to see if it worked without the need of a trip to the dealers. Today I tried it and it worked clutch switch as well(think these are fitted as standard but I didn't fit one :)) can't wait to get up on a long journey now, heaven for my right foot :)
-
It is nice cruise, use mine most days a very nice way to drive...
-
After fitting my cruise stalk to my 2.2 cd the other week I kept on forgetting to see if it worked without the need of a trip to the dealers. Today I tried it and it worked clutch switch as well(think these are fitted as standard but I didn't fit one :)) can't wait to get up on a long journey now, heaven for my right foot :)
Well if you have got one.. I want one now ;D ;D ;D
-
So do I....what else did you do besides fitting the stalk and was it difficult :y
-
So do I....what else did you do besides fitting the stalk and was it difficult :y
That was it. If you can operate a screw driver you can fit the stalk :y
You might need to check if you have a clutch switch fitted and may need tech2 to switch on but bizarrely mine was already activated :)
Found out all I need to know through searching on here.
The stalk came out of my pfl omega and fitted straight on :y
-
Nice one , its the only thing i miss from the elite :y
-
Nice one , its the only thing i miss from the elite :y
Didn't it come as standard on elite?
-
Nice one , its the only thing i miss from the elite :y
Didn't it come as standard on elite?
Yeah i meant i miss it as it was in my old elite ;) its not in my current Mv6 :y
-
Nice one , its the only thing i miss from the elite :y
Didn't it come as standard on elite?
Yeah i meant i miss it as it was in my old elite ;) its not in my current Mv6 :y
Sorry I miss read it :)
That's why I put it in this one as I missed it to from my old Cdx :y
-
Will go and purchase one then and see if it works...thanks :y
-
Will go and purchase one then and see if it works...thanks :y
joff has got one on that breaker.
-
5 minutes to swap the indicator switch over (remember to connect cruise plug ;)) - then a Tech2 session :y
-
5 minutes to swap the indicator switch over (remember to connect cruise plug ;)) - then a Tech2 session :y
Dont understand Tech2 ect , why do you need it for a plug and play item :-\
-
I'm surprised on a 2.2 petrol that it was already enabled in the ECU, as I've not come across one that has been before. Wonder if somebody had had it fitted previously and for whatever reason the stalk was replaced (the cruise stalks tend to go faulty, causing full beam to flash under braking)?
Either way, happy days :y
-
5 minutes to swap the indicator switch over (remember to connect cruise plug ;)) - then a Tech2 session :y
Dont understand Tech2 ect , why do you need it for a plug and play item :-\
The facility is disabled in the DBW engine ECUs (no separate cruise unit in DBW cruise setups, the engine ECU maintains cruise by adjusting the butterflies itself, generally more refined than the non-DBW units that tug on the throttle cable)
-
5 minutes to swap the indicator switch over (remember to connect cruise plug ;)) - then a Tech2 session :y
Dont understand Tech2 ect , why do you need it for a plug and play item :-\
As TB says not plug and play ;)
-
5 minutes to swap the indicator switch over (remember to connect cruise plug ;)) - then a Tech2 session :y
Dont understand Tech2 ect , why do you need it for a plug and play item :-\
As TB says not plug and play ;)
Mine was, give it a try first :y
-
5 minutes to swap the indicator switch over (remember to connect cruise plug ;)) - then a Tech2 session :y
Dont understand Tech2 ect , why do you need it for a plug and play item :-\
As TB says not plug and play ;)
Mine was, give it a try first :y
Mite be different as yours has 2 less pots ???
-
5 minutes to swap the indicator switch over (remember to connect cruise plug ;)) - then a Tech2 session :y
Dont understand Tech2 ect , why do you need it for a plug and play item :-\
As TB says not plug and play ;)
Mine was, give it a try first :y
Mite be different as yours has 2 less pots ???
Nope, the only DBW Omega where cruise is enabled if not fitted at factory is the 2.5TD.
2.2, 2.6, 3.2 is very, very unlikely to be enabled (unless somebody has had it fitted, then removed the stalk). Another possibility is a replacement ECU has been fitted, and the donor ECU came from a cruise enabled car.
2.0 petrol, 2.5, 3.0 have no concept of cruise enabling, as the engine ECU doesn't know about cruise. On these engines, cruise is done by cable tugging