Omega Owners Forum

Chat Area => General Car Chat => Topic started by: tigers_gonads on 24 October 2016, 11:43:24

Title: Toad AI606 installation
Post by: tigers_gonads on 24 October 2016, 11:43:24
Since my little boy is 21 today, he ordered (me and the missus paid) for one of these from Motorguard for 117 quid which i'm happy with.
Agreement was that when the box of tricks was paid for and signed for, the schematics for his Corsa C cdti and the installation instructions would be sent via email.
Problem is, he can't seem to send a pdf to the lads email address  ::)

Has anybody out in OOF land got the installation / programming sheet and also the 54 plate wiring diagrams for a corsa c cdti handy ?
Title: Re: Toad AI606 installation
Post by: Omega VT3000 on 24 October 2016, 12:25:26
Does this help?

http://www.clubgti.com/showthread.php?171600-How-to-fit-and-wire-up-a-Toad-AI606-Alarm-amp-Immobiliser (http://www.clubgti.com/showthread.php?171600-How-to-fit-and-wire-up-a-Toad-AI606-Alarm-amp-Immobiliser)
Title: Re: Toad AI606 installation
Post by: tigers_gonads on 24 October 2016, 13:23:44
Does this help?

http://www.clubgti.com/showthread.php?171600-How-to-fit-and-wire-up-a-Toad-AI606-Alarm-amp-Immobiliser (http://www.clubgti.com/showthread.php?171600-How-to-fit-and-wire-up-a-Toad-AI606-Alarm-amp-Immobiliser)



Saw that earlier mate  :y
Shame the drawing on his table isn't clearer  :(
Thanks anyway  :)
Title: Re: Toad AI606 installation
Post by: iansoutham on 24 October 2016, 17:31:09
Ask nicely and I will see if I can find my old manuals from when I used to install Toad and Clifford alarms.
Title: Re: Toad AI606 installation
Post by: Sir Tigger KC on 24 October 2016, 17:42:21

Agreement was that when the box of tricks was paid for and signed for, the schematics for his Corsa C cdti and the installation instructions would be sent via email.
Problem is, he can't seem to send a pdf to the lads email address  ::)


Can't he print it and send it in the post?  ::)
Title: Re: Toad AI606 installation
Post by: tigers_gonads on 24 October 2016, 17:44:49
Ask nicely and I will see if I can find my old manuals from when I used to install Toad and Clifford alarms.


Ian, I love you and want your babies  :-*

Try again  :D :D
Ian, if you could dig them out, it would be greatly appreciated mate.
Thank you  :)
I'll send you a email address that I know will except pdf's if needed  :y


Title: Re: Toad AI606 installation
Post by: tigers_gonads on 24 October 2016, 17:48:16

Agreement was that when the box of tricks was paid for and signed for, the schematics for his Corsa C cdti and the installation instructions would be sent via email.
Problem is, he can't seem to send a pdf to the lads email address  ::)


Can't he print it and send it in the post?  ::)



Tell me about it  ::)

Picked one supplier that I have dealt with before for him.
This supplier sends you a code on payment / confirmed delivery so you can download it off his site.

Mini Me then orders off somebody else who turns out to be a total oppswit  ::)

He has his mothers brains I fear .......... :-X
Title: Re: Toad AI606 installation
Post by: Sir Tigger KC on 24 October 2016, 18:46:44

Mini Me then orders off somebody else who turns out to be a total oppswit  ::)


As my Old Man always used to say.... " You never bleddy listen! "    ::)  ;D
Title: Re: Toad AI606 installation
Post by: iansoutham on 24 October 2016, 20:52:42
Ask nicely and I will see if I can find my old manuals from when I used to install Toad and Clifford alarms.


Ian, I love you and want your babies  :-*

Try again  :D :D
Ian, if you could dig them out, it would be greatly appreciated mate.
Thank you  :)
I'll send you a email address that I know will except pdf's if needed  :y

Well I have the use and installation manuals dug out. PM me your email and I'll send them over tomorrow evening
Title: Re: Toad AI606 installation
Post by: tigers_gonads on 25 October 2016, 10:30:36
Pm incoming  :)
Title: Re: Toad AI606 installation
Post by: frostbite on 25 October 2016, 15:40:51
I had a mk4 astra with a clifford concept 650mk2, it was good when it was just installed then all problems


My astra was a pre canbus but it had a few canbus parts
 The bloke had trouble installing the alarm and never told me untill I called him up saying the car was refusing to start

I then needed the aa to remove it from the car. Friendly aa man said whoever installed it butchered the wiring, and the alarm will never work again. What a waste of 260 squids
Title: Re: Toad AI606 installation
Post by: iansoutham on 25 October 2016, 16:10:53
I had a mk4 astra with a clifford concept 650mk2, it was good when it was just installed then all problems


My astra was a pre canbus but it had a few canbus parts
 The bloke had trouble installing the alarm and never told me untill I called him up saying the car was refusing to start

I then needed the aa to remove it from the car. Friendly aa man said whoever installed it butchered the wiring, and the alarm will never work again. What a waste of 260 squids

Typical bad installer. I could scare you with some of the horror stories I have seen.

That is why I do not  it do it anymore, too many people rushing and the people like me who do it properly get accused of taking our time.

I know of 4 good installers, including me (other people's comments, not mine) and we have all given up now.
Title: Re: Toad AI606 installation
Post by: iansoutham on 26 October 2016, 22:17:56
Pm incoming  :)

You have email and hints and tips