Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Shackeng on 09 November 2016, 12:13:39

Title: Wanted screen washer filler
Post by: Shackeng on 09 November 2016, 12:13:39
As above, the screen washer bottle filler neck and dipstick for a PFL or MFL.

TIA
Title: Re: Wanted screen washer filler
Post by: Doctor Gollum on 09 November 2016, 13:10:06
Will have a rummage, might have one  :-\
Title: Re: Wanted screen washer filler
Post by: Shackeng on 09 November 2016, 15:06:28
 :y
Title: Re: Wanted screen washer filler
Post by: The Red Baron on 09 November 2016, 22:04:32
Got the neck and lid but no dipstick.  :)
Title: Re: Wanted screen washer filler
Post by: Shackeng on 09 November 2016, 22:44:46
Got the neck and lid but no dipstick.  :)

Thanks Jon, but not much use without it. :(
Title: Re: Wanted screen washer filler
Post by: The Red Baron on 09 November 2016, 22:49:40
Got the neck and lid but no dipstick.  :)

Thanks Jon, but not much use without it. :(
No.they usually fall off into the reservoir. ;)
Title: Re: Wanted screen washer filler
Post by: Shackeng on 11 November 2016, 22:40:48
I'll take the whole screen washer bottle if someone has one. :y
Title: Re: Wanted screen washer filler
Post by: tidla on 12 November 2016, 23:36:33
Got the neck and lid but no dipstick.  :)

Thanks Jon, but not much use without it. :(
No.they usually fall off into the reservoir. ;)

Thats where i keep mine.
Title: Re: Wanted screen washer filler
Post by: Bigron on 13 November 2016, 04:18:40
Mine too; I iknow it won't get lost there!  :y

Ron.
Title: Re: Wanted screen washer filler
Post by: Doctor Gollum on 13 November 2016, 07:45:13
Had a rummage but it isn't immediately obvious :-\ I know I had one as I acquired it especially for the plod one as the grill lights fouled the factory one, but it didn't reach the slam panel as the bottles are also different  ::) so I didn't use it...

I did however find a good condition facelift bottle and neck, no lid... if that's of any use :-\

It's a plod one, so has two pump fittings and no level sensor hole ;)
Title: Re: Wanted screen washer filler
Post by: Shackeng on 13 November 2016, 15:23:11
Thanks Al, but I need the PFL or MFL one to replace my FL one, as I can see the yellow dipstick top through the grille, and the longer one cannot be seen. :y