10456
Omega General Help / Re: Oh boy....probs....
« on: 05 February 2010, 20:01:14 »
at least someone else is having a bad day with there "pride enjoy" 
- 05 June 2024, 09:16:31
- Welcome, Guest
News:
Please play nicely. No one wants to listen/read a keyboard warriors rants....
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
10457
Omega General Help / Re: crank sensor test?
« on: 04 February 2010, 14:40:17 »
i want to test the sensor with a meter,so it must have a ohms value and how 2 test it. Its a 3.0l.
10458
Omega General Help / crank sensor test?
« on: 04 February 2010, 10:57:48 »
can anybody help. Is there a way to test a crank sensor? With a
10459
Omega General Help / Re: Air con died
« on: 03 February 2010, 16:55:12 »
try checking the plug underneath the compesser,sometimes it gets corroaded as its underneath and gets full of muck.
jack car up and its on the bottom of the compresser two pin jobby.
jack car up and its on the bottom of the compresser two pin jobby.
10460
Omega General Help / Re: bonnet opener
« on: 03 February 2010, 16:58:33 »
i second mr Bees option if that fails then its try to release it by putting your hand up from under the car a releaseing it or cut the front grill slats off.
10461
Omega General Help / Re: Smoked Repeaters ?
« on: 03 February 2010, 16:51:31 »
you use to get smoked ones from irmescher with an odinge bulb
10462
Omega General Help / Re: dead stop
« on: 03 February 2010, 16:49:14 »
i would hope its all sorted. but give it time something will need fixing again.the joys of motoring 
10463
Omega General Help / Re: dead stop
« on: 01 February 2010, 17:32:39 »
update again!! all fixed and running sweet 
changed crank sensor., cam cover gaskets, new plugs, and oil change.
changed crank sensor., cam cover gaskets, new plugs, and oil change.
10464
Omega General Help / Re: dead stop
« on: 24 January 2010, 11:16:34 »
right update.!
plenums off, scuttle off. down pipe off, fiter housing off, slacken cooler pipes(block ones) remove crank sensor (tie piece off wire to plug) seems to be a lot of oil under here lets check cam cover gaskets, remove plug leads from lh bank ooh lots of oil. dwn to the factors buy gaskets and oil go home time for a cuppa. refit crank sensor piggin job refit down pipe, refit filter housing time to do cam covers. intake off undo all the vac pipes, remove cam covers more ooh loads oil, clean old rtv off. take new gaskets out of packets!
then lots off swearing" weres the kin O RINGS"phone the factors "SORRY DONT HAVE THOSE" so car sits awaiting 8 LITTLE BITS OF RUBBER. so that be autovaux on monday. another week begging and borrowing cars to get to work.
plenums off, scuttle off. down pipe off, fiter housing off, slacken cooler pipes(block ones) remove crank sensor (tie piece off wire to plug) seems to be a lot of oil under here lets check cam cover gaskets, remove plug leads from lh bank ooh lots of oil. dwn to the factors buy gaskets and oil go home time for a cuppa. refit crank sensor piggin job refit down pipe, refit filter housing time to do cam covers. intake off undo all the vac pipes, remove cam covers more ooh loads oil, clean old rtv off. take new gaskets out of packets!
then lots off swearing" weres the kin O RINGS"phone the factors "SORRY DONT HAVE THOSE" so car sits awaiting 8 LITTLE BITS OF RUBBER. so that be autovaux on monday. another week begging and borrowing cars to get to work.
10465
Omega General Help / Re: dead stop
« on: 16 January 2010, 21:47:54 »
yes me thinks crank sensless as well but i will look at the pack as well.
10468
Omega General Help / Re: dead stop
« on: 16 January 2010, 21:15:43 »
will see when scuttle is off tommorow and start to look.
10469
Omega General Help / Re: dead stop
« on: 16 January 2010, 21:12:10 »
thats what i keep steering towards.
10470
Omega General Help / Re: dead stop
« on: 16 January 2010, 20:36:40 »
got fuel filter to go on as well.