Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

106

Omega Electrical and Audio Help / Rear window won't go up

« on: 11 May 2008, 14:46:06 »

Just went to go out to the beach, wife decides to wind rear o/s window down, now it wont go back up.
It goes up about a quarter of the way then bounces back down again.
Doesn't appear to be anything in the guides/rubbers.
Help and advice please  

107

Omega Electrical and Audio Help / Re: Bulb out on instrument panel

« on: 27 April 2008, 18:50:06 »

Many Thanks

108

Omega Electrical and Audio Help / Bulb out on instrument panel

« on: 27 April 2008, 18:07:40 »

Does anyone know if this maint guide is relevent to facelift models?

http://www.omegaowners.com/forum/YaBB.pl?num=1152618876

as I have a duff bulb behind the speedo clock.

109

Omega Electrical and Audio Help / Re: CCR 2006 replacement, CD30?

« on: 22 April 2008, 20:08:03 »

What to replace my ccr 2006 with?

Can the newer models eg cd30 Mp3, CDR 2005 fit or am I restricted to older models only?

I have replaced my CCR 2006 with a CDR 2005 and all works fine  

110

Omega Electrical and Audio Help / Re: CD30 Head unit

« on: 10 April 2008, 19:51:57 »

Thanks Dave, funny thing is I have just come across that explanation on your website  
I have seen a few advertised stating that the unit is in "virginized mode" I am guessing that this is the same as divorced mode?

111

Omega Electrical and Audio Help / CD30 Head unit

« on: 10 April 2008, 19:30:52 »

As I understand it this model has to be Tech IIed to the car.
Does anyone know how much a dealer will charge for this or does anyone own a Tech II in Kent that can help me out if I buy one of these head units?

112

Omega Electrical and Audio Help / Re: Replacement ISO connectors...

« on: 08 March 2008, 21:37:35 »

Dave DND will be able to tell you.

113

Omega Electrical and Audio Help / Re: Cruise control not working

« on: 23 February 2008, 20:35:41 »

Ok thanks both.
Is there anyway to test the pedel switches or is a case of replace and be lucky?

114

Omega Electrical and Audio Help / Re: Cruise control not working

« on: 22 February 2008, 22:29:06 »

Noticed on the way home from work tonight that my cruise has packed up, now I haven't had chance to check the fuse but everything else that is covered by the same fuse seems to be working  :-/
Any ideas?

no specific fuse on 2.2....

will be stalk or one of the pedal switches most likely on that unit.

Cheers TB, what do you mean by no specific fuse?  :-/

115

Omega Electrical and Audio Help / Cruise control not working

« on: 22 February 2008, 22:01:24 »

Noticed on the way home from work tonight that my cruise has packed up, now I haven't had chance to check the fuse but everything else that is covered by the same fuse seems to be working  :-/
Any ideas?

116

Omega Electrical and Audio Help / Re: Traffic master, What Exactly is it.

« on: 13 February 2008, 08:57:10 »

I had it on my old Vectra and removed it completely and put a switch blank in the dash.  

117

Omega Electrical and Audio Help / Re: Changing Radio / CD / Tape Unit

« on: 13 February 2008, 09:04:11 »

Or use a Connects DOPS 005 to use the display - cheap on Ebay S/H

Have you got a link to that Martin?

118

Omega Electrical and Audio Help / Re: Towbar wiring connector in boot

« on: 13 February 2008, 08:34:49 »

Nice one thanks Andy  
I'll take the feed from the actual wire to the o/s brake light via a 7 way bypass relay  

119

Omega Electrical and Audio Help / Re: Towbar wiring connector in boot

« on: 12 February 2008, 22:52:09 »

Isn't the relay which fits behind the glovebox cheaper at about £16 or could I not just short the socket terminals?
I am assuming that once this relay or piece of wire is in place that the brake live feed wire to the boot socket becomes live?

120

Omega Electrical and Audio Help / Re: Towbar wiring connector in boot

« on: 12 February 2008, 22:42:12 »

.......
6 Stop lights            wire Black / Yellow .......

Just remember though that the brake light feed if fed from this socket is via another trailer brake check 'relay' up front behind the glove box (above driver's feet in earlier cars).

So do you need the relay or can you short two terminals on the socket?
Or splice into feed wire to brake light?