Search the maintenance guides for answers to 99.999% of Omega questions
thanks sir, any advice on the hesitation and jerks mainly up hill, I have push very hard the pedal for power. Thanks, Gibby
Some few days ago I posted in this column that my omega 2.2L estate Z22XE was misfiring then stalling when accelerating and auto gearbox could go into limp mode.I remember this car from about 6 months ago.I went and had a look/read the codes.It had a long list of codes then too.Hello Sir, I really appreciate for the advice, at the moment I'm trying to find the genuine cs sensor to replace the old one and see how it performs. once again thanks
Iirc new cam sensor was advised,and once fitted car ran ok ?
Was sensor genuine or pattern ?
P0340 is the cam sensor ... i would clear the codes and see if they return .
When the cam sensor is faulty it throws up all kind of codes .
If cam sensor comes back replace with genuine VX only and see how you go from there
Please could someone help, my car misfires and stalls whenever trying to Accelerate the following codes come up: my omega 2.2 l auto which failed mot last wk has pass today. I followed some advince you posted to help me, so what I did was to change all the seals both bottom and top. thanks very much for your help, be blessed, gibby
Excellent news Gibby.
Very helpful (as always) Kevin,thanks.I will make sure the OP reads this and try to ensure he gets the correct parts. Hes not far from me so I will have tools etc. if he needs them.
Gibby - read your messages.
Very simple to change and the seals are cheap from Vx.
Interestingy, they never fail unless the injectors have been fiddled with.
hello sir, thax 4 ur advise. the garage whre I did the mot said my omega failed becoz of: 1. one of the injector seals is linking 2. parking bulb front passanger side not working 3. track rod end passager side failed. and 4. one of the number plate bulb not working. that was the report. thax wishing u a best new yr
There easy to replace and use Vx ones as they are known quality (as its a fuel system)
Very simple to change and the seals are cheap from Vx.
Interestingy, they never fail unless the injectors have been fiddled with.
hello sir, thax 4 ur advise. the garage whre I did the mot said my omega failed becoz of: 1. one of the injector seals is linking 2. parking bulb front passanger side not working 3. track rod end passager side failed. and 4. one of the number plate bulb not working. that was the report. thax wishing u a best new yr
There easy to replace and use Vx ones as they are known quality (as its a fuel system)
Was going to say, I would not trust that diagnosis, we have 2 x 2.2's one at 156k the other 125k. Never had any issues with injectors.
What does the MOT failure actually state?
Ohh and take a hint at the other 1,000,000 posts here, in which no one posts in CAPTIALS!
Very simple to change and the seals are cheap from Vx.
Interestingy, they never fail unless the injectors have been fiddled with.
eBay
Innit
