Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: Cam and crank sensor`s

« on: 13 February 2008, 20:41:27 »

have only done a cam shaft sensor myself, not too hard and i`m a novice, there is a tiny bolt behind the cam cover which holds the sensor in place, took me longer to go to halfords and get the tool than it did to change it, think its an 8mm female torq socket you need.

2

Omega General Help / Re: can you clear the EML

« on: 10 February 2008, 21:33:37 »

it was the omega fairy. honest

3

Omega General Help / Re: can you clear the EML

« on: 10 February 2008, 21:24:34 »

thanks for all your help guys, found and fixed the problem, the muppet who fitted it was the problem,me.just checked the wiring for my own peace of mind one of the wires was not connected properly,i would like to think the the omega fairy dissconected it just to wind me up, EML went out straight away. thanks again

4

Omega General Help / Re: can you clear the EML

« on: 09 February 2008, 15:29:07 »

its a 1998 manual, 2.0, have started it a few times but not as many as 20

5

Omega General Help / Re: can you clear the EML

« on: 09 February 2008, 12:58:24 »

thanks for your help

6

Omega General Help / can you clear the EML

« on: 09 February 2008, 12:36:51 »

hi everyone after diagnostics test found my problem was the cam shaft sensor, changed that this morning, the EML is still on, can it be cleared some how? thanks.

7

Omega General Help / Re: omega cutting out at speed

« on: 10 February 2008, 21:45:22 »

problem sorted now it was the cam shaft sensor, thanks for you help guys.

8

Omega General Help / Re: omega cutting out at speed

« on: 10 February 2008, 21:30:41 »

you will be able to find it on previous posts,they can explain it much better than i ever could

9

Omega General Help / Re: omega cutting out at speed

« on: 07 February 2008, 20:35:55 »

ok thanks mate, will do the paper clip test on the weekend

10

Omega General Help / Re: omega cutting out at speed

« on: 07 February 2008, 20:11:41 »

its a 1998 on an r reg,aint done the paper clip test, but had a mate plug in a diagnostic machine in but said he could not find any thing wrong

11

Omega General Help / omega cutting out at speed

« on: 07 February 2008, 19:57:15 »

hello i`m new, but have been looking on this site for a little while. i have a 2.0 omega manual,aint been running right for a while,after seeing the same problem on this site i cleaned the throttle body and the air flow meter and the breather pipes about a month back and it has been running perfectly up untill the start of this week. my new problem is i drive about 7-10 mile then i lose power for a few seconds, then it will cut out, will start up again straight away but with the engine management light on, while the light is on it wont cut out, once parked up after an hour  will start up with out the light on and repeats the same process, done a diagnostic check but nothing is showing up, any ideas any one.

12

Omega General Help / Re: Central Locking

« on: 08 February 2008, 23:24:57 »

mine was the same when using central locking, resolved mine by using the key and turning it anti clock wise quite firmly,the door opened and central locking started working again, worked for me but i could have been lucky