1
Omega General Help / heater matrix is blown
« on: 20 February 2009, 20:27:41 »
hi my heater matrix is blown and going to bypass is there any problems in doing this
- 15 July 2025, 00:10:14
- Welcome, Guest
News:
Please play nicely. No one wants to listen/read a keyboard warriors rants....
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Omega General Help / Re: omega 2.5 cutting out
« on: 18 February 2009, 14:39:28 »Quote
Please can anyone advise we are running out of ideas the engine just cuts out while driving. I did the paperclip test and it didnt show anything. I have read various ideas on here and have cleaned out everything advised and fitted a new icv valve. It is still cutting out. Changed spark plugs and ht leads after seeing the leads were covered in oil from leaking gasket which we have also changed along with the rocker cover. Did the paperclip test again and code 17, 21, 31 & 57 came up. We have now bought a new crankshaft sensor but still cutting out. How many things do we have to keep changing and if we drive it like this will it do any harm? Please help running out of money fast!mine has the same problem i have a v6 3.0l i have chang my chank sensor and is still doing it have bin told it may be the air mass sersor try that it may help
4
Omega General Help / how do i do the paperclip test
« on: 19 February 2009, 23:49:52 »
hi can anyone tell me how to do the paperclip test thanks
5
Omega General Help / Re: mass air flow meter part number
« on: 18 February 2009, 14:45:57 »
ps has anyone got the part number
6
Omega General Help / Re: mass air flow meter part number
« on: 18 February 2009, 14:44:24 »
have not put it the rolling road as that is dvla registered
dont know how to put pic's on but i belive it has a cat 4or 5 head on it
and has bin bord out aswell
dont know how to put pic's on but i belive it has a cat 4or 5 head on it
and has bin bord out aswell
7
Omega General Help / Re: mass air flow meter part number
« on: 17 February 2009, 20:40:10 »
the last ower did it so dont know, but i know he spent a lot of money on it to get it to that welcome to look 
i have always had fords first omega so dont know mach about them
i have always had fords first omega so dont know mach about them
8
Omega General Help / mass air flow meter part number
« on: 17 February 2009, 16:00:26 »
hi has anyone know what the part number to the v6 3.0 mass air flow meter is
PS i have a car that has bin modified to over 300bhp will this overload it
PS i have a car that has bin modified to over 300bhp will this overload it
10
Omega General Help / Re: Misfire
« on: 17 February 2009, 16:02:47 »
try ebay for the dis pack got one for 39.99 off there new
11
Omega General Help / Re: my engine keeps cutting out
« on: 17 February 2009, 15:24:04 »Quote
Hihi do you mean the airflow meter or intake air temp sensor or am i totally wrong
This sounds to me to be the air mass sencer in the trucking from the air filter, may be the fuse link is on the way out, usual signs may be engine hot but temp ok, fuel comsumtion a bit high if you can souce another to try first, they are expensive about 80.00 plus and i think their are two.
See how you go
12
Omega General Help / Re: my engine keeps cutting out
« on: 17 February 2009, 15:21:28 »
hi to all i have fand that the air filter case locks are not on the case could this be the problem or not
13
Omega General Help / Re: my engine keeps cutting out
« on: 16 February 2009, 19:32:05 »
caunt picter it can you give me more info or picter please (sorry) 
14
Omega General Help / Re: my engine keeps cutting out
« on: 15 February 2009, 14:22:53 »
still have the problem but now the computer is saying sensor is OK now anything else it could be
15
Omega General Help / Re: my engine keeps cutting out
« on: 12 February 2009, 23:04:46 »
hi to all have put the part in and it is still cutting out but taking a longer time now anyone with any ideas welcome of what it could be now 