Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Can't find that gasket. Please help

« on: 01 May 2011, 10:40:54 »

Hi,

I am in need to buy this gasket. It's the gasket between the egr valve and the head.

I know this is used by many cars but I need it for my Omega Z22XE.

http://www.autopartswarehouse.com/sku/Felpro/EGR_Valve_Gasket/FP71270.html

Does anyone know a shop in uk where I could buy it from?

Thanks in advance.

2

Omega General Help / Re: Hot air blowing on the back of the engine.

« on: 27 April 2011, 18:52:33 »

Thx.

I have got that issue with this gasket between the engine block and the egr.

What is the best way of doing it?

What is the gasket part number?

Sorry guys but i have no idea what is the name of it.

Pictures below



Any chance that I can use some kind of glue.

Thanks in advance.

3

Omega General Help / Hot air blowing on the back of the engine.

« on: 23 April 2011, 14:54:40 »

The car: Omega 2.2 Z22XE (petrol +lpg) 2001

I find out that there is hot air leak on the back of the engine between the egr and the engine. It looks like that hot air comes from the engine more that the egr. My manifold has just been fixed. Head gasket has been replaced 2-3 months ago because of the oil leak. The oil is not leaking anymore.

The issue is that the car hasn't pass MOT on the emission test.

Since then  I found out that that there was a hole in one of the breather pipe. The top plastic bit of MAF sensor was unglued.(Again air leak). Manifold and exhaust were leaking.

The car has lost power but it seems it's better now after these things have been fixed.

I am worrying about that air leak and also once you press the accel. pedal you hear the air whistle.
The car is not that powerful and it's struggling when driving up to hills but it's not very bad!

I have already spent lots of many on this MOT! I have to pay again for the MOT and I want to be sure it will pass this time. This is the 3rd week I am struggling with this car since first MOT test

Do you know guys what it can be on the back of the engine?

Any advice is welcome

Thank in advance.


Please let me know if you need any more information.

I assume that because the hole in the breather pipe some gasket might start blowing.

4

Omega General Help / Re: Omega 2.2 Z22XE - Engine Issues - Please Advice

« on: 30 January 2011, 20:30:45 »

Thx guys. I will check it again.

Cheers.

5

Omega General Help / Omega 2.2 Z22XE - Engine Issues - Please Advice

« on: 30 January 2011, 11:41:36 »

Hi,

I managed to read the codes from my omega 2.2 petrol b fl 2001 180k on the clock! + lpg.

Please see the following codes:

0130     P0130   O2 Sensor 1 Incorrect Signal 
0340     P0340   Camshaft Position Sensor Circuit No Signal
P0301 Cylinder 1 Misfire Detected 
P0302 Cylinder 2 Misfire Detected 
P0303 Cylinder 3 Misfire Detected
P0304 Cylinder 4 Misfire Detected
P0110  Intake Air Temperature Circuit

All air pipes cleaned new filters new spar plugs.

I have recently disconnected also the O2 sensor so that is why it showed me that as well.

The car take more fuel, 20mpg;/ and having problems during acceleration (power loss) it's not happening always.

I believe that the Cam sensor needs replacing.

Please advice

Thanks.

Best Regards
ber5ien

6

Newbie Welcome Area / I'm new

« on: 30 January 2011, 11:13:44 »

Hi Guys,

I would like to introduce myself.

HELLO OMEGA WORLD.

I think that everyone who drives an omega will end up on this forum!!! 

7

Car Parts, bits For Sale & Wanted / Cam sensor Needed

« on: 07 February 2011, 00:04:49 »

Hi Guys,

I'm looking for second hand cam sensor the part is 90520850. It's for my Omega 2.2 Z22XE

Responses are welcome.

Unfortunately i din't find any in sell section.

Best Regards
ber5ien