Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Pages: [1]   Go Down

Author Topic: just sheared the star drive nut on the EGR valve  (Read 546 times)

0 Members and 1 Guest are viewing this topic.

Plomien

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Swansea
  • Posts: 2349
  • Rescue the beer and drink the maiden
    • Landrover Freelander TD4
    • View Profile
just sheared the star drive nut on the EGR valve
« on: 16 May 2009, 17:02:27 »
took the EGR off as it needed a clean after being advised it was causing the eml light to come on occasionally.
sorted the egr our and working fine but when I was tightening everything it sheared the top off.

So scrappy visit me thinks to get a replacement, once i get the old bit out. for now its secure with one nut anyway :y
Logged
No more Omega but still hangs around

Darth Loo-knee

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Death Star
  • Posts: 18826
  • Jammie smells of Pooh....
    • TIE Fighter
    • View Profile
Re: just sheared the star drive nut on the EGR valve
« Reply #1 on: 16 May 2009, 17:58:06 »
Drill it and tap it to 8 mm I think from memory, doesn't matter if you put a torx headed bolt in or a normal headed bolt then :y
Logged
Everything to do with Omega's. Breaking, Servicing from Cambelts to Oil Changes... Please Pm me for details...

The Red Baron

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • burton on trent.staffs
  • Posts: 6178
  • 3.0mv6 sal/3.0elite lpg/2.2dti estate
    • 2000 chipped mv6 3.0l
    • View Profile
Re: just sheared the star drive nut on the EGR valve
« Reply #2 on: 16 May 2009, 18:59:06 »
you maybe able to drill the centre & use an easy out if you have any. just an idea.  ;)
Logged

vauxhall & halfords trade cards.v6 cam locking kit.<local only.

dad1uk

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Birmingham
  • Posts: 1721
    • Vauxhall Zafira 2.2
    • View Profile
Re: just sheared the star drive nut on the EGR valve
« Reply #3 on: 16 May 2009, 19:08:19 »
Being as the bolt has snapped, it shouldn't be too tight. You might be surprised to find it'll come out with your fingers! Or maybe a good set of pliers/mole grips to get it started.
Good luck.
Logged
best wishes
Simon.

waspy

  • Guest
Re: just sheared the star drive nut on the EGR valve
« Reply #4 on: 16 May 2009, 19:17:34 »
Quote
Being as the bolt has snapped, it shouldn't be too tight. You might be surprised to find it'll come out with your fingers! Or maybe a good set of pliers/mole grips to get it started.
Good luck.

Agreed. I don't know what access you have on the V6, but if you've enough. Hack saw the snapped stud to give you a slot for a flathead screw driver. This has got me outa the poo a few times :)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.041 seconds with 17 queries.