Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[charlie]

THis is for an 2.2dti,
p1694-(4) glow time tell tale circuit open-not present
p1690-(4)mal indication lamp(mil)circuit open-not p1125-(5)critical system malfuction(2)
p0105-(1)boost pressure sensor circuit high input np
P1635-(a) glow device circuit general error not present
all help most welcome cheers charlie

[geoffr70]

Hi Charlie, this is now in the maint. section. I don't know if it's of any use to you?

http://www.omegaowners.com/forum/YaBB.pl?num=1205270870

[Andy B]

THis is for an 2.2dti,
p1694-(4)
p1690-(4)
p1125-(5)
p0105-(1)
P1635-(a)
all help most welcome cheers charlie

maintenance section 
http://www.omegaowners.com/forum/YaBB.pl?num=1197277611

[charlie]

Ive had a look in the mantanice section,there seems to be different faults with the same codes,Im at a bit of a loss with understanding this

[Andy B]

Ive had a look in the mantanice section,there seems to be different faults with the same codes,Im at a bit of a loss with understanding this

Oops! I referred you to a petrol engine codes. 

you want these .....

http://www.omegaowners.com/forum/YaBB.pl?num=1205270870

[fergy]

Hi
Re 2.2 Dti codes
1694-(4) glow time tell tale circuit open-not present
 I believe that this means the glow plug indicator bulb in the dash has blown or other wiring problem, BUT it is shown as NOT  PRESENT so appears to be something that has happened in the past and been fixed.

P1635-(a) glow device circuit general error not present
Is the  general indication that one or more glow plugs or wiring have failed. Again it is  NOT PRESENT so is historic.
 Suggest having noted the codes, you clear them then re read them before  taking too much corrective action.
 Can't help you with the others Sorry.

[charlie]

Cheers fergie,I wonder if these have anything to do with the little heater being disconnected(the one under the bumper)theres a job for tomorrow.charlie

[fergy]

Hi Charlie

Do you reckon that the P1690 code is telling you that the MIL ( Malfunction indication Light) has a problem? If so, it sounds as if you have had a couple of bulbs busted behind the dash or some associated wiring problems. I would still reset then see what it comes up with first though.
Best of luck
 Fergi