Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1]   Go Down

Author Topic: Thanks for the guides  (Read 946 times)

0 Members and 1 Guest are viewing this topic.

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24525
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Thanks for the guides
« on: 13 April 2011, 09:37:11 »
Big Thanks to Razzo for a guide on removing wishbone bushes ready for sliding in the new poly bushes

and to Marks DTM Calib for a guide on replacing your bonnet catch spring, great when you r bonnet wont release even if the cable is the correct tension, and I guide I need myself!
Logged

feeutfo

  • Guest
Re: Thanks for the guides
« Reply #1 on: 13 April 2011, 10:34:24 »
And me, been fiddling with the bonnet catch on the other car constantly. To no avail. Thanks Mark, and Razzo.
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34014
  • Git!
    • View Profile
Re: Thanks for the guides
« Reply #2 on: 14 April 2011, 09:15:28 »
All feedback on the guide appreciated (as it sometimes seems easy to me yet I may be assuming certain stages)
Logged

feeutfo

  • Guest
Re: Thanks for the guides
« Reply #3 on: 14 April 2011, 09:30:00 »
Previously I couldn't gain access to the underside of the slam panel to release the spring from the cable. Noticed the small nut by the rad to take the under cover off but asn't sure I wouldn't end up with a load of bits pinging off in all directions. Should be easy enough now I can see how it works.  :y

 Spring is badly worn as it was set up loose and bonnet was rattling while driving. Presumably because they hadn't sussed the cable adjustment.  :-/
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.012 seconds with 17 queries.