Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[VX1]

Evenin all,
Well I gave my headlights a clean with 1200 grit wet an dry as suggested on here a few times and then gave them a polish. I have not seen anyone put the end results of there cleaning of there headlights so I thought I would. So here you go these pics are before I cleaned them and after.

If you look closely you can see that they are dull.










Just need to wire up the fogs now.  

[Danny]

the bumper's gone dark too

[VX1]

Yeah I know. I hate sneezing all the time, should clear my nose before I start doing anything like this   .
Seriuosly though I upgraded the front and rear bumpers from a cd car. But now I need to wire them in as they don't work yet, wiring isn't at the fuse box  

[cem_devecioglu]

Did you tried very fine polish with machine , seems like not totally polished ?

PS: Glass polishing is really hard job..I think necessary more work.

[VX1]

Did you tried very fine polish with machine , seems like not totally polished ?

PS: Glass polishing is really hard job..I think necessary more work.

There are better than before but as you say need abit more work doing. I used T cut but I do have some GS27 in the garage so might use that next time.

[Jimbob]

Remember Headlight 'glass' is Plastic in this case

[cem_devecioglu]

polishing is applicable to plastics also

[magnul]

I recently installed brand new fog lights, and that made the old head lights look awful in comparison. I wet sanded with 2400 grit, then with 4000grit and finally polished with Meguiars ScratchX (should have used PlastX but didn't care). The lenses look almost like new.

[IrmscherKris]

How much are xenons these days?

[VX1]

How much are xenons these days?

xenon's or projector's?