Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hairyguy4]

my omega drive belt had snapped and the car overheated, i replaced the drive belt, had the head gaskets replaced and all new belts, since then it has started cutting out and not refiring till about 15-20 mins later and then starts fine and then happens all over again

i have replaced the coil pack and has a new camshaft censor, problem still occurs

anyhelp aprecciated

[feeutfo]

what v engine is it? Might be crank sensor, look for paperclip test in maintenance section. Code 19 iirc for p clip test, cant remember the pedal trick code. If not clean the icv. If its related to the work thats been done, maybe have a look for damage the flying belt may have caused, there as a phew vac pipes and elec. plugs in that area. Hope
helps.

[Dazzler]

If its a V6 then its likely to be crank sensor code 19 as stated.

As said try paper clip test if yours is 2.5 or 3.0