Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jan Suhr]

On my 2001 omega the printed circuitboard on the backside of the intstrument panel has been damaged. I had it removed a while ago and the circuits for the battery lamp is broken.

I wonder if the printed circuitboard/foil is available as a sparepart. It looks like it is replaceable.


Thanks


Jan

[I_want_an_Omega]

Send me a PM with all the numbers from the board.

I have a number of instrument panels and would be quite happy to supply you with the circuit board if required.

Regards .......... Rob

[TheBoy]

The 'board' is not available seperately.

If you get replacement instruments, make sure its right for your year of car, and your engine (varies).

If you manage to locate a new 'board', it may well need programming/configuring via Tech2

[Abiton]

If it's just a copper track or two that has broken, it's quite straightforward to repair with thin wire and a (small, low-power) soldering iron. Old-fashioned lead-based solder is probably better as its melting point is a bit lower than 'modern' stuff.
Just scrape down to bare shiny copper either side of the break(s) and link across with some fine wire.
A little of the plastic may melt, but not too much if you're quick.