Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Loom to drive a CID. Parts needed  (Read 1189 times)

0 Members and 1 Guest are viewing this topic.

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Loom to drive a CID. Parts needed
« on: 17 April 2011, 16:24:31 »
One for The Boy or VXL V6. What bits are needed to make up a loom to drive the CID :-/
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

zirk

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Epping Forest
  • Posts: 11443
  • 3.2 Manual Special Saloon ReMapped and LPG'd and
    • 3.2 Manual Special Estate
    • View Profile
Re: Loom to drive a CID. Parts needed
« Reply #1 on: 17 April 2011, 18:36:26 »
pm sent Rob.

Chris  :y
Logged

VXL V6

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Warwickshire
  • Posts: 9870
    • 530D M Sport, Elite 3.2
    • View Profile
Re: Loom to drive a CID. Parts needed
« Reply #2 on: 17 April 2011, 18:44:21 »
Best to make it utilising a Trafficmaster loom. Will also need the 12 pin RGB plug and some loom, quite difficult to locate the plug but they can be had from ebay.de or you can use a CDC2 autochanger plug.

Logged

albitz

  • Guest
Re: Loom to drive a CID. Parts needed
« Reply #3 on: 17 April 2011, 18:48:16 »
Quote
One for The Boy or VXL V6. What bits are needed to make up a loom to drive the CID :-/

Wires.  :y



Sorry Rob - couldnt resist. :D ;D
Logged

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Loom to drive a CID. Parts needed
« Reply #4 on: 17 April 2011, 19:53:51 »
Quote
Quote
One for The Boy or VXL V6. What bits are needed to make up a loom to drive the CID :-/

Wires.  :y



Sorry Rob - couldnt resist. :D ;D

;D
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted

RobG

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Bristol
  • Posts: 13831
  • I might have a link, pic or part number for that
    • 16 plate Mokka. Vivaro
    • View Profile
Re: Loom to drive a CID. Parts needed
« Reply #5 on: 17 April 2011, 20:08:10 »
Quote
Best to make it utilising a Trafficmaster loom. Will also need the 12 pin RGB plug and some loom, quite difficult to locate the plug but they can be had from ebay.de or you can use a CDC2 autochanger plug.

Got it :)
Logged
All that is necessary for the triumph of evil is that good men do nothing.

UPVC windows/doors/fascias/soffit/gutters supplied/fitted
Pages: [1]   Go Up
« previous next »
 

Page created in 0.011 seconds with 17 queries.