Topic: Exhaust manifold to head gaskets v6 (Read 938 times)

doz · « **on:** 21 March 2012, 00:54:20 »

Were these still a problem on the later cars? I now have a 2000 3lt. It's not doing the classic fut fut at start I'm just curious if they changed the design. If they do go is it still a engine out job to do them or have you found a magic manifold pixie at the bottom of the scrap yard which loves to do them.

albitz · « **Reply #1 on:** 21 March 2012, 05:47:43 »

Problem solved on 2.6/3.2. Not an engine out job,but bloody awkward.

Plenty of advice available from those who have done it.Specifically,Loo-knee & MarksDTM.

bigboykarl · « **Reply #2 on:** 21 March 2012, 07:24:12 »

when lo-knee did mine on my 2.5 elite seeing as he was stripping it all down i had head gaskets cam belt thermostat and all sorts done...that reminds me i must sort it out instead of letting it sit there and rot...lol

Elite Pete · « **Reply #3 on:** 21 March 2012, 07:39:37 »

Don't know why but i've had loads of drivers side ones but no passenger side

Its quite an easy job when you've done a few

News:

Author Topic: Exhaust manifold to head gaskets v6 (Read 938 times)

doz

Exhaust manifold to head gaskets v6

albitz

Re: Exhaust manifold to head gaskets v6

bigboykarl

Re: Exhaust manifold to head gaskets v6

Elite Pete

Re: Exhaust manifold to head gaskets v6