Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mustangboy]

Hi All.

Finally got around to have my timing belt changed and all Running great except i have what i beleive is the service light on (car shape with a spanner accross it)  and i dont understand why ?.  we also fitted a new water pump and changed oil and filter at the same time. any clues on how to turn off would be great.

[RobG]

Cable trapped or something left disconnected. Do the pedal trick and post the codes
http://www.omegaowners.com/forum/index.php?topic=90581.0

[Entwood]

Hi All.

Finally got around to have my timing belt changed and all Running great except i have what i beleive is the service light on (car shape with a spanner accross it)  and i dont understand why ?.  we also fitted a new water pump and changed oil and filter at the same time. all clues on how to turn off would be great.

First and foremost ,.....  it is NOT a "Service Indicator Light" .. it is commonly known as a "Malfunction Indicator Light"  (MIL) .. or a warning that the electronics have detected a problem..

Page 12 :

http://homepage.ntlworld.com/andrew.reynolds983/Manuals/Omega2002Manual.pdf


As you have a 2.6  you need to read and follow this ... where it refers to the PEDAL TRICK

http://www.omegaowners.com/forum/index.php?topic=90581.0

This will give you the fault codes .. once you have them post up the numbers .. we'll take it from there ... 

[mustangboy]

Thanks all for the quick responce to my problem.  will try the paper clip trick at the weekend or sooner if possable and post the code Numbers if any.  i dont think it can be anything major as the car is running perefectly 

[Entwood]

Thanks all for the quick responce to my problem.  will try the paper clip trick at the weekend or sooner if possable and post the code Numbers if any.  i dont think it can be anything major as the car is running perefectly 

Won't work

You have a 2.6

Do the PEDAL TRICK as I said above !!

[dbug]

Thanks all for the quick responce to my problem.  will try the paper clip trick at the weekend or sooner if possable and post the code Numbers if any.  i dont think it can be anything major as the car is running perefectly 

Won't work

You have a 2.6

Do the PEDAL TRICK as I said above !!

Guess there are times you have to shout 

[tipper]

I HAVE THE SAME PROB. HOW DO YOU RESET THE SYSTEM SO THE LIGHT GOES OUT. CHEERS

[TheBoy]

I HAVE THE SAME PROB. HOW DO YOU RESET THE SYSTEM SO THE LIGHT GOES OUT. CHEERS

Fix the fault

[dbug]

I HAVE THE SAME PROB. HOW DO YOU RESET THE SYSTEM SO THE LIGHT GOES OUT. CHEERS

As he said^^^^^ - fix the problem and don't shout 

[mustangboy]

Done the pedal trick but does this sound right ?.  The yellow light car symbol with a spanner through apears to  flash 4 times fairly slowly then 9 times quickly does this sense ?? does 11119 sound right or are all codes 4 digits

[Entwood]

Codes are 4 digits for yours .. did you watch the video which explains how it works ??

Pedal Trick
Foot on brake, gas pedal to the floor.
Turn on ignition to position II (do not fire the engine in position III)
When dash lights go out the yellow light car symbol with a spanner through it should flash.
4 sets of flashes/numbers pause and so on.
10 flashes is zero.
Constant flashing no codes.

http://images.omegaowners.com/images/guides/paperclip_test/pedaltrick.html

[mustangboy]

Whoops got wrong was counting the initial/First light when ignition was turn on and last one was ten flashes not nine so i make code is 1110 which i believe is the P1110 Intake Manifold Valve 1 Voltage High. must have left a wire off or some thisng will check it out over the weekend

[RobG]

Check the rear multi-ram connector 

[mustangboy]

Thanks rob will check that out. is it easy to get to

[RobG]

Rear n/s of engine. Circled yellow in this pic