Omega V8 - Corvette Engine & Pontiac 6 Speed Gearbox

Started by Jim, 28 July 2012, 19:13:48

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Jim

Today in Total Vauxhall Magazine I spotted this German Opel Omega B which has been fitted with a Corvette V8 & Pontiac 6 Speed Gearbox, Also for some reason if you look at the last picture I'm in it!!





Vauxhall & Halfords Trade Club Card Holder - Irmscher 3.0 V6 Elite & Irmscher 3.2 V6 Elite

cam2502

Where are you jim? Oh, see you now... Nice dress  :D  ; ;D

Jim

Quote from: cam2502 on 28 July 2012, 19:27:59
Where are you jim? Oh, see you now... Nice dress  :D  ; ;D
;D ;D
Blue & White Checked Shirt
Vauxhall & Halfords Trade Club Card Holder - Irmscher 3.0 V6 Elite & Irmscher 3.2 V6 Elite

omega3000


GastronomicKleptomaniac

Quote from: Jim on 28 July 2012, 19:32:44
Quote from: cam2502 on 28 July 2012, 19:27:59
Where are you jim? Oh, see you now... Nice dress  :D  ; ;D
;D ;D
Blue & White Checked Shirt

"Did you spill my pint?"
Servicing and repairs done in NE. Special rates for OOFers! PM me.

Jim

Quote from: GastronomicKleptomaniac on 28 July 2012, 20:56:07
Quote from: Jim on 28 July 2012, 19:32:44
Quote from: cam2502 on 28 July 2012, 19:27:59
Where are you jim? Oh, see you now... Nice dress  :D  ; ;D
;D ;D
Blue & White Checked Shirt

"Did you spill my pint?"
;D ;D Aye,
Luckly both of them where with me!!
Vauxhall & Halfords Trade Club Card Holder - Irmscher 3.0 V6 Elite & Irmscher 3.2 V6 Elite

waspy

Rob's (RobseyMV6) Monaro is in the top left of the last pic above some dodgy guy wearing a blue & white check shirt ;D

feeutfo

Pic appears to back up some very basic measurements taken from Robs car. Taking into account the headers and plug leads on his ls3. When measuring from the steering box heat shield, accross to the pas side, the engine position would mean moving the abs pump.
Which seems to have been achieved by moving the battery, presumably to the boot BMW style, and re-positioning the Abs pump in the battery tray area.

In fact the pulleys on the ls3 come very close to fouling the battery anyway, and puts the engine way off centre. Although that's difficult to see in the pics.

Not sure why a new subframe would be needed. Maybe the sump is different on what "looks" like an ls7...? :-\